PowderMet AMPM Tungsten Special Interest
Session Chair: Julie Campbell Tremblay, PMT, Rio Tinto Metal Powders
066
Japan
3:45 p.m.
A Combined Multiphase-Field/Discrete-Element Method for Sintering of Blended Elemental Powders Kazunari Shinagawa, Kyushu Univeristy
070
USA
4:10 p.m.
Variation of Double Press Double Sinter to Produce High Density Low-Alloy Steel Parts Harb Nayar, FAPMI, TAT Technologies LLC
155
4:35 p.m.
The Effect of HIP on the Microstructure of Metal Injection Molded 718 Rees Jones, ARC Group Worldwide
Session Chair: Robert G. Powell, Atlas Pressed Metals
138
Canada
The Effect of Elevated Sintering Temperature on the Microstructures and Mechanical Properties of Low Alloy PM Steels Jordan Kramp, Stackpole International
098
India
Sinter Hardening (Bainite) of PM Parts by Hot Gas Quenching N. Gopinath, Fluidtherm Technology Pvt Ltd.
154
Ultra-High Temperature Sintering, the Benefits and Potential PM Opportunities Francis Hanejko
Session Chair: Deepak Madan, Danik Innovations LLC
149
Impact of Sinter-Based Metal Additive Manufacturing on Metal Injection Molding Animesh Bose, FAPMI, Desktop Metal
161
3D Printing of Permanent Magnets Kalathur Narasimhan, FAPMI, P2P Technologies
115
Germany
Advantages of AM to Precious Metals Applications Jochen Heinrich, C. Hafner GmbH + Co KG
Session Chair: Jason Ting, Elementum 3D
158
Density Verification of Cubes Produced by Direct Metal Laser Solidification (DMLS) Bryce Christensen, GKN Sinter Metals
108
A Comparison and Evaluation of Defect Detection Capabilities of Resonant Acoustic Method Non-Destructive Testing on Additive Manufactured Parts Bryan Butsch, The Modal Shop, Inc.
133
Uniform Distortion of PM Parts in Heat Treat Spencer Wolf, ECM USA, Inc.
Session Chair: Louis-Philippe Lefebvre, National Research Council Canada
060
Effects of Powder Attributes of 25Cr7Ni Stainless Steel on the Properties of Parts Fabricated Through Laser Powder Bed Fusion Arulselvan Arumugham Akilan, University of Louisville
087
Evaluating Spreadability of Feedstocks for Powder Bed Fusion Using Novel Techniques and Powder Rheology John Yin, Freeman Technology Ltd.
142
The Influence of Particle Size Distribution on the Flowability of Ti-6Al-4V Powders for Additive Manufacturing Processes Mahdi HabibnejadKorayem, AP&C Advanced Powders and Coatings, Inc.
Session Chair: John Johnson, FAPMI, Novamet Specialty Products
132
Core-Shell Technology for Advanced and Next Generation Material Systems Richard Stephenson, SVMT LLC
028
Failure Analysis of Heat Resistant Pusher Furnace Tubes Used for Tungsten Powder Production Shankar Venkataraman, Schmidt + Clemens GmbH + Co. KG
055
Evolution of Reduction Process from Tungsten Oxide to Ultrafine Tungsten Powder via Hydrogen Gaoan Lin, Xiamen Tungsten Co Ltd.
Session Chair: Christopher T. Schade, Hoeganaes Corporation
574
Austria
Heat Treatment of Sintered Steels: Advances in Alloying Techniques and Systems Herbert Danninger, FAPMI, Technische University Wien
558
Sinter-Hardening of PM and AM Parts Gilles L'Esperance, FAPMI, École Polytechnique de Montréal
571
Development of a Free-Sintering-Low-Alloy (FSLA) Steel for the Binder Jet Process Christopher T. Schade, Hoeganaes Corporation