PowderMet AMPM Tungsten Special Interest
Session Chair: Jeffrey A. Danaher, Abbott Furnace Company
002
USA
9:30 a.m.
Microstructural Evolution Simulation for Property Prediction in Cold Spray Processing Danielle Cote, Worcester Polytechnic Institute
079
9:55 a.m.
Research into Near Shape Processing of Magnesium and Magnesium Alloy Powders Steven Johnson, Central Connecticut State University
016
Denmark
10:20 a.m.
Compatibility of CIM Feedstock With 3D Printed Single-Use Polymer Molds Kyriakos Didilis, AddiFab
Session Chair: Roland Warzel, III, North American Höganäs Co.
051
Fatigue Performance of a Low Alloy Sinter-Hardened Steel Ian Donaldson, FAPMI, GKN Sinter Metals
229
Finite Element Evaluation the Stress Intensity Factors for Internal Cracks Within a Powder Compact Under Internal Pressure from Entrapped Air Joseph Wright, Drexel University
102
China
Effect of Phosphorus and Carbon on Microstructure and Properties of High Manganese Non-Magnetic Steel Chongxi Bao, NBTM New Materials Group Co. Ltd
Session Chair: Scott Davis, Hoeganaes Corporation
061-R
Lightweighting Material and Process Options for Automotive Applications—Focus on PM Aluminum Chaman Lall, MPP
206
Powder Consolidation of a High Temperature Aluminum Alloy Stuart M. Shirley, Colorado School of Mines
187
Recent Developments and Trends in Aluminum Powder Metallurgy Ian Donaldson, FAPMI, GKN Sinter Metals
Session Chair: Thomas F. Murphy, FAPMI, Hoeganaes Corporation
241
Optimization of Water Atomized 17-4 Stainless Steel for Binder Jetting Edel Arrieta, University of Texas
064
Comparison of Binder Jet and Laser Powder Bed Fusion for Co-Cr Alloys Zhuqing Wang, Kennametal Inc.
188
Powder Casting: Producing Bulk Metal Components from Powder without Compaction James Paramore, U.S. Army Research Laboratory
Session Chair: John Johnson, FAPMI, Novamet Specialty Products
017
Germany
Development of Novel Spherical Multinary Alloy Powders Containing Tantalum and Niobium for Optimization of Intrinsic Material Properties in AM Melanie Stenzel, TANIOBIS
084-R
Investigations on Laser Powder Bed Fusion of Tungsten Alloys Nabil Gdoura, Bayerische Metallerke GmbH
221
Dynamic Metallic Structural Design Enabled via Additive Manufacturing Vanshika Singh, University of Tennessee, Knoxville
Session Chair: Blaine Stebick, Phoenix Sintered Metals
012-R
Sweden
Effect of Atomization Method and Post-Processing Treatments on the Microstructure and Mechanical Properties of Ti-6Al-4V Alloys Manufactured via Laser Powder Bed Fusion Leandro Feitosa, Sandvik Machining Solutions AB
091
Malaysia
Effect of Energy Concentration on Properties of Additive Manufactured Ti-6Al-4V via SLM Farhana Mohd Foudzi, Universiti Kebangsaan Malaysia
167
Determining the Effect of Layer Thickness on Mechanical Properties of Al-Si10-Mg Produced by Laser Powder Bed Fusion James Sears, AMAERO Inc
Session Chair: Randall M. German, FAPMI, German Materials Technology
182R Liechtenstein
Wear Phenomena in Different Cemented Carbides During Rotary-Percussive Drilling in Reinforced Concrete Steven Moseley, Hilti AG
192
Plastic Behavior and the Structure of Dislocations in Single Crystal Tungsten Brady Butler, DEVCOM Army Research Laboratory
197
Ductile Bulk Pure Tungsten David Foley, Shear Form, Inc.
Session Chair: W. Brian James, FAPMI, PMtech
550
Blind Testing of SS-316L Metal Powders Using the Revolution Powder Analyzer Todd Palmer, The Pennsylvania State University - University Park
557
Canada
Evaluation of the GranuDrum® as a Tool for Standardized Powder Differentiation Mathieu Brochu, McGill University
549-R
A Prototype of a Standard Spreadability Tester for Additive Manufacturing Justin Whiting, Georgetown University/National Institute of Standards and Technology
