Login   |   Register   

POWDERMET2021 Header

 

Monday Sessions
3:45 p.m. - 5:00 p.m.

PowderMet Technical Sessions

 

  • Presentation numbers are listed before the author’s country identification.
  • Encore presentations will be indicated by having an "R" listed after the presentation number.

 

SESSION P07
Innovative Process PM

Session Chair:
Logan Smith,
GKN Sinter Metals

125

Canada

3:45 p.m.

Artificial Intelligence Applied to the Development and Characterization of PM Components
Simon Gelinas,
Laval University

173

China

4:10 p.m.

Material Preparation of High-Temperature Solid-Oxide Fuel Cell Interconnector
Wei Wei Yan,
NBTM New Materials Group Co., LTD

172

USA

4:35 p.m.

Combining Soft Magnetic Materials (SMC) with Advanced Pressing and Annealing Technologies to Support Magnetic Properties
Arthur (Bud) Jones,
Symmco, Inc.


 

SESSION P08
Process Optimization and Productivity Improvement II

Session Chair:
Vincent Paris,
Rio Tinto Metal Powders

045

India

3:45 p.m.

Optimizing Sintering Furnace Design and Operating Parameters for Best Results 
Ravindra Kumar Malhotra,
Malhotra Engineers

101

USA

4:10 p.m.

Comparison of the Ejection and Withdrawal Process for the Production of Positive Cutting Inserts
Christian Mueller,
Dorst America, Inc.

076

USA

4:35 p.m.

Increased Productivity and Longer Tool Life in Machining High Strength Powder-Forged Connecting Rods
Bo Hu,
North American Höganäs Co.

 

AMPM Technical Sessions

 

 

SESSION A07
AM Modeling I

Session Chair:
Thomas F. Murphy, FAPMI,
Hoeganaes Corporation 

042

USA

3:45 p.m.

Metal Binder AM Sintering Simulation to Manage Process Induced Distortion and Failures
Jeff Robertson,
Hexagon Manufacturing Intelligence 

179

Canada

4:10 p.m.

Relationship Between Segregation and Powder Handling System Design
Mursal Ashrafi,
Jenike & Johanson, Ltd

081

Finland

4:35 p.m.

Multiscale Materials Modeling in the Design of Fatigue Resistant High Entropy Alloy Based Material Solutions for Metal AM 
Anssi Laukkanen,
VTT Technical Research Centre of Finland Inc.


 

SESSION A08
Light Metals & Alloys

Session Chair:
Jessu Joys,
United States Metal Powders Inc.

072

Switzerland

3:45 p.m.

Improving Specific Strength of 3D Printed Aluminum Alloys Using Particulate Ceramic Reinforcements
Vaclav Pejchal,
CSEM SA

096  Saudi Arabia

 

4:10 p.m.

Development of Pure Magnesium Stochastic Foams by Additive Manufacturing
Bandar AlMangour, PMT,
King Fahd University of Petroleum & Minerals – KFUPM

113

Austria

4:35 p.m.

Prevention of Solidification Cracks Through Heterogeneous Grain Refinement in Laser Powder Bed Fusion of Al-Cu Alloys
Philipp Mair,
University of Innsbruck


 

SESSION A09
AM Powder Characteristics III

Session Chair:
Colin McCracken,
Oerlikon Metco (Canada) Inc.

103  United Kingdom

 

3:45 p.m.

Application of Novel and Standard Test Techniques to Evaluate Powder Flow for AM
Cameron Blackwell,
The Manufacturing Technology Centre

152

France

4:10 p.m.

On the Variability of Powder Characteristics for the LPBF Process
Marc Thomas,
ONERA

153

USA

4:35 p.m.

Microstructural and Micromechanical Characterization of Microparticulate Feedstock for Solid-State Cold Gas-Dynamic Spray Metal Additive Manufacturing
Bryer Sousa,
Worcester Polytechnic Institute

 

Tungsten Technical Session

 

 

SESSION T03
Molybdenum—AM Processing

Session Chair:
Mike Stawovy,
H.C. Starck Solutions

119

Austria

3:45 p.m.

Molybdenum Manufactured Additively by Laser Powder Bed Fusion: The Effect Mechanism of the Alloying Elements Carbon, Titanium and Zirconium
Jakob Braun,
University of Innsbruck

050

USA

4:10 p.m.

Process Parameter Development and Characterization for Additive Manufacturing of Molybdenum-Based Powders via Laser Powder Bed Fusion (LPBF)
Faith Oehlerking,
H.C. Starck Solutions

129

USA

4:35 p.m.

Structure Property Relationships of Refractory Metals Fabricated Using Electron Beam Powder Bed Fusion
Christopher Ledford,
Oak Ridge National Laboratory

 

Special Interest Program

 

 

SIP 1-3
Improvement in Precision / Accuracy / Variation Control II: Equipment Advances

Session Chair:
Roger Lawcock, FAPMI,
Stackpole International

562

USA

 

Thermal Processing Improvements to Reduce Variation in PM
Dustin Yetzer,
Abbott Furnace Company

555

USA

 

Improvement of Dimensional Precision in PM Steel Parts
Cody Kalinoski,
Engineered Sintered Components

546

USA

 

3D Printing for Production: Reducing Variation of Binder Jet 3D Printed Parts
Andrew Klein,
ExOne

 

 

Sponsored by
MPIF and APMI Logos