Session Chair:
Stephen Madill, PMT,
Nichols Portland LLC

Thermo-Fluid Analysis of Satellite Formation During Close-Coupled Gas-Atomization for Production of Precision Metal Powders
Jordan Tiarks,
Ames Laboratory

Gas-Die Geometric Requirements for Producing Uniform Flows in Close-Coupled Gas Atomization: A Numerical Study
Franz Hernandez,
Ames Laboratory

Close-Coupled Transferred Arc Plasma-Wire Atomization
Joseph Tunick Strauss, FAPMI,
HJE Company, Inc.

Session Chair:
Joshua S. Hume,
Nichols Portland LLC

Diffusion Alloyed Powders with Higher Density for Automotive Applications
Pavan Kumar Kandregula,
Sundram Fasteners Limited

A Comparison of a Novel Approach to Delubrication and Sintering to the Conventional Sintering of Advanced High Density Lubricant Containing Compacts
Jacob Feldbauer,
Abbott Furnace Company

Comparison of a Novel Approach to Delubrication and Sintering Process to the Conventional Sintering of EBS Containing Compacts
Scot Coble,
The Pennsylvania State University—DuBois

Session Chair:
John W. Lyons,
Line Craft, Inc.

Evaluation of Consistency in Machining of PM Components Produced with Common Copper Steels
Cody Kalinoski,
Engineered Sintered Components

Enhancing the Machining Consistency of PM Components—A Look at a New Machining Additive 
Neal Kraus,
Hoeganaes Corporation

New Machining Enhancer for High Strength Powder-Forged Connecting Rods
Bo Hu,
North American Höganäs Co.

Session Chair:
Howard A. Kuhn,
University of Pittsburgh

AM-Enabled Design Enhancement of an Aeroderivative Gas Turbine Combustion Transition Duct
Zachary Dyer,
Siemens Power Generation, Inc.

Topological and Mechanical Properties of CoCrMo Minimal Surface Sheet-Based Lattice Structures Fabricated by Laser Powder Bed Fusion
Bandar AlMangour, PMT,
King Fahd University of Petroleum & Minerals – KFUPM

Additive Manufacturing of Refractory Grid Structures—Historical Overview
Juha Kotila,
EOS Finland - Electro Optical Systems Finland Oy

Session Chair:
Chaman Lall,
MPP

Research of Specific Heat Treatment for AlSi7Mg0.6 Alloy Made by Laser Beam Melting
Cassiopée Galy,
IRT Sait Exupéry

Support Design for Externally Supported Part Surfaces Adapted to the Wet Chemical Support Removal of LPBF-Manufactured Parts Made of AlSi10Mg
Tobias Schmithüsen,
Fraunhofer Institute for Laser Technology ILT

Directed Energy Deposition: The Triathlete
Kevin Luo,
FormAlloy

Session Chair:
Ian Mellor,
Metalysis Ltd.

Evaluating the Changing Sensitivity of AM Powders to Segregation and Humidity as They are Used and Recycled 
Gregory Martiska,
Mercury Scientific Inc.

Detection of Low Density Contaminants in Recycled 3D Printing Metal Powders Using Micro-Focus X-Ray Tomography
Roger Pelletier,
National Research Council Canada

Microstructural Characterization of Tungsten and Molybdenum Alloys Produced by Laser Powder Bed Fusion
J. Scott O'Dell,
Plasma Processes, LLC

Session Chair:
Animesh Bose, FAPMI,
Desktop Metal

Review of Tungsten Heavy Alloys—Composition, Processing, Microstructure, Properties
Randall M. German, FAPMI,
German Materials Technology

Investigations on Laser Powder Bed Fusion of Tungsten Alloys
Tobias Schwanekamp,
iWFT Institute of Manufacturing and Tooling Technology, RFH

Investigation of Laser Powder Bed Fusion of Tungsten Heavy Alloys
Michael Pires,
Lehigh University

Session Chair:
Roland Warzel, III,
North American Höganäs Co.

Material Options for Improved Dimensional Consistency
Roland Warzel, III,
North American Höganäs Co.

Understanding the Factors Influencing PM Dimensional Change to Improve Part Consistency
Kylan McQuaig,
Hoeganaes Corporation

Use of Advanced Premix Solutions to Increase Dimensional Consistency
Julie Campbell Tremblay, PMT,
Rio Tinto Metal Powders