California State University, Los Angeles (Cal State LA)
Aye Thiri Khaing - Effect of Lunar Dust on Microstructural and Mechanical Properties of 3D Printed Stainless Steel
Cristian Soria Lopez - Microstructure and Mechanical Properties of Silicon Carbide Reinforced Stainless Steel Synthesized Via Wire Laser Directed Energy Deposition
Carnegie Mellon University
Sarah Birchall - Characterizing Flowability of Water Atomized Powders for Laser Powder Bed Fusion Additive Manufacturing
Georgia Institute of Technology (Georgia Tech)
Wei Huang - Analytical prediction of yield strength for Ti-6Al-4V in laser powder bed fusion
Kent State University
Noman Alias Ghulamullah - Experimental Investigation on Porosity and Dimensional Accuracy of SOFC Tubular Metal Supports by Direct Metal Laser Sintering
North Carolina State University (NCSU)
Benjamin E. Labiner - Production, Processing, and Characterization Gas-Atomized IN800H Powder for Additive Manufacturing
Pennsylvania State University, DuBois
Julie M. Hedlund - Effects of High Green Strength 2.0 Lubricant in Silver Tungsten Powder
Purdue University
Sivasubramanian Chandramouli - Orientation-specific surface response of shot peening in laser powder bed fusion Ti-6Al-4V parts
Purdue University in Indianapolis
Andrew J. Gillespie - Evaluating Material Capabilities Using Open-course Binder Inkjet Printer
University of Louisville
Monem Moktadir - 3D Printing of Zirconia Interference Screws for ACL Reconstruction
Naiyer Shokri - Effect of deposition parameters and rescanning on the microstructure, texture, and thermomechanical behavior of Additively Manufactured NiTi
University of North Carolina, Charlotte
Tien Herd - Commercial Resins for Stereolithography of Silicon Carbide
University of Texas at El Paso
Cesar A. Lopez - A comprehensive and comparative study ofmicrostructure and mechanical properties for post-process heat treatment of AlSi7Mg alloy components fabricated in different LPBF systems
Hernan Valenzuela - Powder Degradation Analysis in Recycled Pure Tungsten for Electron Beam Melting (EBM)
University of Utah
Alex J. Hyatt - Producing Iron Powder Directly from Iron Ore Concentrate in the Hydrogen Reduction Melt-less Steelmaking (HRMLES)
University of Wisconsin - Madison
Ali Nabaa - Thermocapillary-Force Driven Pore Elimination in Powders for Additive Manufacturing
Virginia Tech
Amanda X. Wei - Augmenting Part Density and Strength in 316L Binder Jet Additive Manufacturing through Topology Optimized Binder Infill Design
Raffi Shirinian - Development of Powder-Cored Wire for Alloy Control with Wire Laser Directed Energy Deposition Additive Manufacturing
Nathan Stoetzel - Predicting the Effect of Lunar Environment on a Wire-Laser Directed Energy Deposition Process
Gannon University
Gavyn k. Hansotte - Design and Optimization of a Metallic Isolator for Enhanced Vibration Reduction
Iowa State University
Belle E. Finney - Magnetic properties of Nd-Fe-B magnets made from gas-atomized powders
Lehigh University
Gokalp Cetin - SLM Inconel 625 Metal Matrix Composite with TiC Reinforcement for Forging Die Coatings
Md Shovon Zahid - Formation of TiC reinforced Inconel 718 metal matrix composite via laser powder bed fusion additive manufacturing process
Hope E. Spuck - Exploring Process Parameters for the Additive Manufacturing of Soft Magnetic Composites
Zakk Walters - Magnetic properties of oxalate coated iron powders based soft magneticcomposites
Bianka Pajo - Fabrication of Silica Particles for Vibration-Absorbing Ceramics in Rotating Detonation Engines
Liwei Zhang - Computational Modeling of Metal Fiber Sintering and Surface Diffusion Dynamics
Krishna Sai Aparna Munjuluri - Simulating a Hybrid Process (AM + MIM) of Base Metals for High Performance Applications
Hassan Soltani - Additive Manufacturing of Al-6061 Alloy by Material Extrusion (MEX): Process Development and Mechanical Characterization
Angel F. Bravo - Powder-optimized T6 LPBF AlSi7Mg Alloy: A Comparative Study with Cast F357 for Enhanced Mechanical and Thermal Performance
Luis A. Marquez Papadakis - Impact of Thermal Aging and Heat Treatment on the Fatigue Performance of AlSi10Mg
Zhaozhen Huang - Sintering behavior of Hydrogen-Reduced Iron Ore Concentrate
Cole D. Walker - Micro-CT Analysis of Binder Assisted 3D Printed Parts
Liam F. Wood - Oxidation of Pack-Cementation Coated Additively Manufactured Mo-Si-B-Ti for Turbine Blade Applications
Cristian Banuelos - Investigation of Residual Stresses in Laser Powder Bed Fusion Manufactured Ti64 Specimens after Machining Using X-ray Diffraction
