Session Chair:
Brian Pittenger,
Jenike & Johanson, Inc.

Powder Metallurgy Application to Heat Transfer and Fluid Dynamics in Liquid Cooled Heatsinks
Virgiliu Savu,
GKN Sinter Metals

Computational Design and Experimental Validation of Fracture Toughness and Tribological Performance of SPS-Fabricated SiC/cBN-Reinforced Alumina Composites
Syed Sohail Akhtar,
King Fahd University of Petroleum & Minerals

PM-HIP Benchmarking Analysis of Abaqus UMAT Subroutine Using 316L Stainless Steel Large Nozzle
Katelyn Nelson,
Naval Nuclear Laboratory

Session Chair:
Mark Young,
Metco Industries, Inc.

Effect of Supersolidus Liquid Phase Sintering Conditions on the Bonding of Particles, Microstructure, and Mechanical Properties of AlSi10Mg Alloy
Mohamed Trigui,
École de Technologie Supérieure

A Double Sand-Sealed Electric Kiln with Inconel-Sheet Fabricated Retort for Production of Reaction-Sintered and Nitride-Bonded High-Strength Silicon Carbide Parts
Ravindra Kumar Malhotra,
Malhotra Engineers

Unveiling the Sintering Process of Blended Elemental Powder Metallurgy Titanium Alloys from Dual Perspectives of Microstructure and Pore Architecture
Kejia Pan,
Northwest Institute for Nonferrous Metal Research

Session Chair:
Dustin Hickman,
VALIMET, Inc.

Enhancing Sustainability and Powder Lifecycle in Powder Bed Fusion – Laser Beam: Reuse and Re-Atomization of AlSi10Mg
Sofia Kazi,
Chalmers Tekniska Hogskol

Degradation, Reuse and Recycling of Metal Powder in PBF-LB
Eduard Hryha,
Chalmers University of Technology

A Novel Powder Recycling Route for Additive Manufacturing: From Used Metal Powders to New and Composite Feedstock via Vacuum Sintering and EIGA Process
Ivan Lorenzon,
Pometon SpA

Session Chair:
Ian Mellor,
Metalysis Ltd.

Comprehensive Rheological Characterization of Metallic Material Extrusion Additive Manufacturing Feedstocks for Improved Printability Assessment
Gabriel Marcil-St-Onge,
École de Technologie Supérieure

Effect of Powder and Feedstock Characteristics on Printability in Material Extrusion Additive Manufacturing of Metallic Components
Hackem Zammali,
École de Technologie Supérieure

Automated Parameter Optimization for Pore-Free Green Parts in Piston-Based Material Extrusion
Lennard Hermans,
Fraunhofer IAPT

Session Chair:
Zak Fang, FAPMI,
University of Utah

Spark Plasma Sintering of Nickel Bonded High Entropy Carbides
Mahlatse Rabothata,
University of Witwatersrand

Development of a Novel High Entropy Alloy for the Fabrication of WC-HEA Cemented Carbides
William Bouchard,
Laval University

Influence of the High Entropy Carbide Formation Route on Microstructure and Properties of HEC-Ni-Based Cemented Carbides
Johannes Pötschke,
Fraunhofer IKTS

Session Chair:
Lauren Garrison,
Commonwealth Fusion

A History of Liquid Phase Sintering of Tungsten Heavy Alloys in Microgravity
John Johnson, FAPMI,
Novamet/Ultra Fine Specialty Products

Towards the Production of Bulk Nanostructured Ductile Tungsten
Dekota Thies,
 

The Effect of Rhenium on the Deformation Behavior of Molybdenum Single Crystals
Benqi Jiao,
Northwest Institute for Nonferrous Metal Research 
 

Session Chair:
Bhaskar Dutta,
DM3D Technology LLC

Connecting Titanium to Human Bone
Colin McCracken,
Oerlikon Metco

Development of Fully and Functionally Graded Porous Titanium Alloy
Sebastien Germain Careau,
Quebec Metallurgy Center (CMQ)

No presentation scheduled at this time.
 

Session Chair:
Greg Wallis,
Dorst America, Inc.

A Review of Rare Earth Metallurgical Processing: Material Options and Best Practices in Vacuum Induction Melting
Phil Geers,
Blasch Precision Ceramics

Processing
Iver Anderson, FAPMI
Ames National Laboratory

Additive Manufacturing Innovations for Permanent Magnets: Enabling Next-Generation Motor Design
Fabrice Bernier,
National Research Council Canada