Session Chair:
John Gurosik,
Gasbarre Press & Automation

Essential Isostatic Pressing Technology for PM HIP Components
Anders Magnusson,
Quintus Technologies

Preparation and Microstructural Characterization of Ti55541 Titanium Alloy with Excellent Strength and Ductility
Xiaohao Zhao,
Xi'an Sino-Euro Materials Technologies Co., Ltd.

PM-HIP Production of Critical Structural Aircraft Components from Alloy Ti-5Al-5V-5Mo-3Cr
Mat Kirsh,
The Boeing Company

Session Chair:
Dan Merritt, PMT
Hoeganaes Corporation

Retained Austenite Formation and Its Impact on Mechanical Properties of Sinter-hardened and Heat-treated Low Alloy Steels
Amber Tims, PMT
North American Höganäs Co.

Effect of In Situ Copper-Manganese Alloying on Hardenability of Mo-based PM Steels
S. Sundar Sriram,
Sundram Fasteners Limited

Microstructure and Properties of Nano-Oxide Strengthened Alloy Fabricated by a Versatile Facile Route
Deyin Zhang,
University of Science and Technology Beijing

Session Chair:
Philippe Boucher,
École de Technologie Supérieure

Influence of Silicone Resin Branching Structure on Magnetic Properties of FeSiAl Magnetic Powder and Magnetic Powder Cores
Jiang Huangyong,
NBTM New Materials Group Co. Ltd.

Sm-Fe-C based Compounds for High Performance Permanent Magnet
Yusuke Hirayama,
National Institute of Advanced Industrial Science and Techno

Influence of Zinc and Calcium Phosphate Reinforcement Powders on the Corrosion and Microstructural Evolution of Magnesium Alloy via Friction Stir Processing
Annayath Maqbool,
King Fahd Univ of Petroleum & Minerals

Session Chair:
Michael Brand,
Los Alamos National Laboratory

Laser Powder Bed Fusion of Iron Silicon Soft Magnetic Alloy: Process Optimization and Magnetic Properties
Anatolie Timercan,
National Research Council Canada

Materials, Processing, and Characterization of Multi-Material 17-4PH Stainless Steel and Zirconia Components Produced by Fused Filament Fabrication
Axel Müller-Köhn,
Fraunhofer IKTS

Exploring the PBF-LB Processability of a Novel High Strength Low Alloyed Steel
Satya Chaitanya Vaddamanu,
Chalmers Tekniska Hogskol

Session Chair:
Simon Gelinas,
Universite Laval

Investigation of the Flow and Application Behavior of Nanoparticle-Coated Stainless-Steel Powder in PBF-LB/M
Tim Brocksieper,
Ruhr-University Bochum

Spreadability of Metal Powders: Combining Powder Characterization and DEM Simulations
Aurélien Neveu,
Granutools

Powder Flowability of Elemental Niobium, C103, and Other Structural Materials for Powder Bed Fusion
Dina Khattab,
Purdue University

Session Chair:
Tom Pfingstler,
Atlas Pressed Metals

Magnesium Alloy Development for Additive Manufacturing of Biodegradable Implants: The Effect of Powder Size and Morphology on the Sinterability
Mert Celikin,
University College of Dublin

Laser Powder Bed Fusion of Cutting Tool Components in SSAB AM TS2 Powder: Processability, As-Printed Performance and Industrial Integration
Bruno Guimarães,
Palbit S.A.

Eliminating Thermally Induced Porosity: Advances in HIP and High-Pressure Heat Treatment
Chad Beamer,
Quintus Technologies

Session Chair:
Oladapo Eso,
Kennametal Inc.

Metal Binder Composition Optimization Strategies in Cemented Carbides to Enhance Cutting Performance
Yasuki Kido,
Sumitomo Electronic Industries

No presentation scheduled at this time.
 
 

WC- and Co-Free TiC/NbC–Fe/Ni Cermets for Wear in Mining: From Microstructure to Abrasion Behavior
Johannes Pötschke,
Fraunhofer IKTS

Session Chair:
Mike Stawovy,
Elmet Technologies

Additive Manufacturing of Ta-W Alloys: A Gradient Approach to Microstructure and Cracking Behavior
Sila Atabay,
Lawrence Livermore NL Lib

A Decade of Refractory Metal L-PBF AM
Ryan Anderson,
Quadrus Corporation

Tungsten 3D Printing using Electron Beam Powder Bed Fusion
Jonathan Buckley,
JEOL USA

Session Chair:
Amir Nobari,
Tekna

A Perspective on the Role of Powder Metallurgy in a More Sustainable Future of the Production of Metals Including Titanium and Iron & Steel
Zak Fang, FAPMI,
University of Utah

Session Chair:
Juha Kotila,
Delva Oy
 

Design and Process Insights in Binder Jet AM
Harsha Jamadagni,
Indo-MIM

Evaluation of Binder Jetting AM Technology for Fabrication of 10%Co Tungsten Carbide Tools
Hadi Miyanaji,
Kennametal

Binder Jetting
Simon Hoeges,
GKN Sinter Metals GmbH

Mentor:
Louis-Philippe Lefebvre
 

Effects of Heat Treatment on the Microstructure and Mechanical Performance of TI6AL4V Printed with Laser Powder Bed Fusion
Bernice Addai,
Southern University and A&M College

Interrelation of Secondary Carbides, Sintering Atmosphere, and Crack Propagation in Ti(C,N)-Based Cermets
Angel Biedma,
Universidad Carlos III de Madrid

Additive Manufacturing and Heat Treatment of Ti-6Al-4V: Microstructure, Mechanical, and Fatigue Performance of Thin-Walled Compliant Components
Eva Prinz,
University of Waikato

Mentor:
Richard Mason,
Mason Global Materials

Process Parameter Development and Mechanical Property Evaluation of Pure Tungsten Fabricated by Electron Beam Melting
Cristian Banuelos,
University of Texas at El Paso

Process Development for Defect-Free Overhangs in Electron Beam Powder Bed Fusion of Chemically Reduced Tungsten
Sarath Chandra Reddy Karumudi,
Mid Sweden University

Effects of Powder Production Methods on Tungsten Dissolution in Niobium During Additive Manufacturing
Benjamin Labiner,
North Carolina State Univeristy (NCSU)