Session Chair:
George Coppens,
Amstead Automotive

A Multiscale Digital Model of the PM Process Chain
Christoph Broeckmann,
RWTH Aachen University

Accelerating Gear Development through Modeling Surface Densification Rolling for PM Gears
Philipp Scholzen,
Höganäs AB

Numerical and Experimental Investigation of Densification, Deformation and Phase Transformation during Hot Isostatic Pressing of AISI H13 Tool Steel
Yuanbin Deng,
 

Session Chair:
Kylan McQuaig,
Hoeganaes Corporation

Thermal Diffusivity of Common PM Steels
Bo Hu,
North American Höganäs Co.

Steam Oxidation of FL-5008
Roland Warzel III,
North American Höganäs Co.

Improving the Toughness of Hiped Low Alloy Steel Nuclear Pressure Vessel Material By the Use of A Powder Oxide Stripping Process
John Sulley,
Rolls-Royce

Session Chair:
Jason Chileski, PMT,
Burgess-Norton Mfg. Co.

High-Density PM and Functional Density Gradients via Advanced Compaction and Sinter-Forging Routes for Superior Strength with Weight Reduction
Sudarshan Palve,
Egearz Pvt Ltd

Analysis of the Effects of Lubricant and Iron Powder Particle Sizes on Compaction Behavior
Naofumi Takatori,
JFE Steel

Functionally Graded Printed Compaction Tools
S. Sundar Sriram,
Sundram Fasteners Limited 

Session Chair:
Mojtaba Najafizadeh,
SJTU

The Influence of Particle Size and Morphology on the Hausner Ration in Additive Manufacturing Refractory Metal Feedstocks
Scott Ohm,
Elmet Technologies

Effect of Humidity on Commercial Pure Ti Powder Properties
Abdelrahman Khalil,
McGill University

Deterioration of Part and Powder Quality Through Multiple Powder Bed Fusion Cycles
Dina Khattab,
Purdue University

Session Chair:
Martin Dopler,
Metalpine GmbH

Toward Unified Dynamic Image Analysis Specifications for Metal Powders Across Multiple Alloy Systems
Rajeshree Varma,
Purdue University

Particle Shape and Packing: A DIA-Based Approach
Rajeshree Varma,
Purdue University

New Rotating Drum Rheometer Measurements to Better Predict Powder Behavior in AM Printers
Gregory Martiska,
Mercury Scientific Inc.

Session Chair:
Elena Gordo,
Universidad Carlos III de Madrid

Bringing Components Back to Life from the Broken Dream Graveyards: A Novel Chemical Strategy to Remediate Trapped Powder in Metal AM Internal Cavities and Passages
Agustin Diaz,
REM Surface Engineering, Inc.

Seeing Recyclability: Morphology Mapping of Vacuum Recovered Metal Powders
Rajeshree Varma,
Purdue University

Supporting the Royal Canadian Navy by Recycling Critical Materials to Produce AM-Grade Metal Powder
Manuel Martin,
Industrial Materials Institute - NRC

Session Chair:
Madison Rase,
Hyperion Materials & Technologies

Properties of WC-Co with Alloyed Binder
Oladapo Eso,
Kennametal Inc.

Creep Behaviour of Cemented Carbides — Influence of Binder Alloy Composition and Carbon Content
Ralph Useldinger,
University of Luxembourg

Discrete Element Method Simulation of Three-Point Bending Test for Cemented Carbide
Soto Terasaka

Session Chair:
Ralph Useldinger,
University of Luxembourg

Advanced Refractory Metal-Based Composites by Electro-Sinter-Forging: W–Cu and Novel W-free Synaptite Systems
Sébastien Recalcati,
EPoS Technologies SA

Exploration of W–Ni–X Systems for Lower-Temperature Sintering of Tungsten Heavy Alloys
Thibaud Hureaux,
Plansee Tungsten Alloys

AI-Guided Development of Crack-Free Cermets for Laser Powder Bed Fusion
Abu Anand,
Phaseshift Technologies

Session Chair:
Zak Fang, FAPMI
University of Utah

From Microstructure to Processing and Properties: FIB, PFIB, SEM and TEM Characterization of Additively Manufactured Titanium Alloys
Phillippe Plamoondon,
École Polytechnique de Montréal

Turning Oxygen Embrittlement into an Asset: Strong and Ductile High-Oxygen Ti-O-Fe Alloys
Ma Qian,
Royal Melbourne Institute of Technology (RMIT) 

High Performance Alloys via Advanced PM & Consolidation Processes
Bradley Richards,
Materials Implemented

Session Chair:
Kalen Fitch,
Gasbarre Products, Inc.

Strip Casting and Scaling-up Production of Rare Earth Magnet Materials
Sasha Long,
Arcast Inc.

Vacuum Strip Casting: Regaining Lost Technology for Future Advancement
George Bernhard,
Consarc Corporation

Bringing Back Magnet Production to the US: Opportunities and Challenges
Aamir Abid,
Retech