Session Chair:
W. Brian James, FAPMI,
PMtech

Reducing Variability in Flowability Measurements through Tailored Reference Materials for AM Powders
Jean-Francois Archambault,
AP&C Inc., A Colibrium Company

Data-Driven Evaluation of Green Part Homogeneity in Metal Binder Jetting Through In-Situ Image Analysis
Lennart Waalkes,
Fraunhofer IAPT

Argon Analysis in PM-HIP Consolidation: Capabilities, Detection, and Variability
Rachel Turfitt,
Naval Nuclear Laboratory

Session Chair:
Jane LaGoy,
Bodycote

Effect of Canister Thickness on Densification and Microstructural Evolution of PM-HIPed SS 316L Powders
Kameswara Ajjarapu,
Oak Ridge National Laboratory

Powder Manufacturing Strategies for Iron-Based Powders in PM-HIP Processing of SMR Structural Components
Changwoo Jeon,
EML Co., Ltd.

Active HIP Atmospheres: The Next Lever for HIP Processing
Anders Magnusson,
Quintus Technologies

Session Chair:
Michael Petzold,
Oerlikon Metco (US) Inc.

Development of Ultra-Rapid Cooling Dual-Nozzle Gas Atomization for Fe-Based Amorphous Alloy Powder Production
TaeHoon Kang,
EML Co., Ltd.

Utilizing Powder Characterization Techniques for Optimization  of Coarse Particulate Production Process
Rajiv Tandon,
Chemalloy Company, LLC

Transferred Arc Plasma-Wire Atomization of Refractory Metals
Joseph Tunick Strauss, FAPMI,
HJE Company, Inc. 

Session Chair:
Juha Kotila,
Delva Oy

Additive Manufacturing and Heat Treatment of Ti-6Al-4V: Microstructure, Mechanical, and Fatigue Performance of Thin-Walled Compliant Components
Eva Prinz,
University of Waikato

Integrated Two-Phase Thermal Management in Aluminum Components Using Additive Manufacturing
José Muñiz,
Equispheres Inc.

Convergence of AM and PM Techniques to Fabricate Large Scale Parts for Nuclear Applications
Soumya Nag,
Oak Ridge National Laboratory

Session Chair:
Ian McCarthy,
VALIMET Inc.

Towards the Prediction of Melt Pool Geometry in Metal Laser Powder Bed Fusion Processes: Experimental Validation using Open Data
Aurore Leclercq,
École de Technologie Supérieure

Multiphysics Modeling and Experimental Investigation of Molten Pool Dynamics in Directed Energy Deposition of Ti-6Al-4V
Abul Fazal Arif,
King Fahd Univ of Petroleum & Minerals

Simulation of Powder Melting Phenomena in Additive Manufacturing Using Lattice Boltzmann Method
Andrew Allshorn,
AT 3D-SQUARED Ltd

Session Chair:
Sunil Badwe,
Continuum Powders

Enhanced Cryogenic Mechanical Properties of Additively Manufactured 316L Stainless Steel Using Reused Powder
Chohyeon Lee,
Kookmin University

Effect of Heat Treatment on Properties of 4130 Low Alloyed Steel Processed by Powder Bed Fusion – Laser Beam
Satya Chaitanya Vaddamanu,
Chalmers Tekniska Hogskol

Cold Metal Fusion – Fatigue of Ti6Al4V as-Sintered and HIP
Christian Staudigel,
Headmade Materials GmbH

Session Chair:
Natasha Sacks,
Stellenbosch University

Comparison of Cemented Carbide Properties Made from Reclaimed WC-Co Powders Obtained by Different Recycling Methods
Anne Vornberger,
Fraunhofer IKTS

Effect of Milling on Shrinkage Kinetics of WC-Co-Cr Zn-Reclaimed Submicron Powders
José Manuel Sánchez Moreno,
CEIT-BRTA

The Influence of Different Amounts of Recycled Zinc Reclaimed Powder on Properties, Microstructure and Performance of a WC-6Co Cemented Carbide for Rock and Concrete Drilling
Susanne Norgren,
Sandvik Coromant

Session Chair:
John Johnson, FAPMI,
Novamet/Ultra Fine Specialty Products

A High-Density, L-PBF Manufactured Alloy for Conformal Radiation Shielding in Spacecraft Applications
Tyler DuMez,
Elmet Technologies

Development of Refractory Spherical Powders by Plasma Technique
Heer Majithia
Kymera International
 

Defect Characterisation in Additive Manufacturing of Pure Tungsten – In Process and Post Process Monitoring
Alfred Sidambe,
University of LIverpool 

Session Chair:
Mathieu Brochu,
McGill University

Titanium Alloy Powder Production via the Metalysis Process
Ian Mellor,
Metalysis

Advances in Titanium Powder Production for Additive Manufacturing: A 2026 Review with Emphasis on High-Efficiency RF Plasma Technology
Jérôme Pollak,
Tekna

Analysis of Explosion Characteristics of Fine Titanium Powders
Martin Dopler,
Metalpine GmbH

Session Chair:
John Noteman,
Noteman Group LLC

Sales Pipeline Architecture: Building Structure, Accountability, and Success
Paul Hauck,
Hauck-Met Solutions

Navigating DoD/DoW Market Opportunities
John Noteman,
Noteman Group, LLC

Chairman:
Louis-Philippe Lefebvre
 

Mechanical Microscopy of Hard Ceramic–Metal Composites: From Conventional WC–Co to Alternative Sustainable Systems
Fanny Marvaldi,
Universitat Politecnica de Catalunya (UPC)

Densification and Microstructure of WC-High Entropy Alloy Composites Processed Through Different Sintering Techniques
Priscilla Valverde Castillo,
Université Laval (Laval University)

Synthesis and Laser Cladding of Gas-Atomized Fe-Cr-C-Ni Hardfacing Alloy and its Characterization
Swapnil Sable,
COEP Technological University, Pune

Chairman:
Richard Mason,
Mason Global Materials

Liquid Phase Sintering of Creep-Resistant Cu-based alloy (GRCop-42)
Atul Anand,
Technische Universität Wien

Towards Dimensional and Compositional Accuracy in Binder Jetting: an Investigation of Process Parameter Optimization and Binder Burn Off
Alexandra Darroch,
University of Waterloo

Tailored Anisotropy in Cold Spray Additively Manufactured GRCop-42: Process-Structure-Property Relationships
Michael Ross,
University of California, Irvine (UC Irvine)