Session Chair:
Mark Young,
Metco Industries, Inc.

Rate-Independent Constitutive Modeling for Powder Compaction Based on Ramberg-Osgood Uniaxial Equation
Gholamreza Aryanpour,
University of Quebec

Understanding the Effect of Triaxiality Variation in MPIF Std 10 Specimens
Abhishek Chawan,
Amsted Automotive- Means Industries

Fatigue Assessment of Powder Metal Steels via the FKM Guideline
Ian Donaldson, FAPMI,
GKN Sinter Metals

Session Chair:
S.K. Tam,
Powder Matrix Forming Technologies LLC

Development of CuAlMn Shape Memory Alloy through Micro Powder Injection Molding
Abu Bakar Sulong,
Universiti Kebangsaan Malaysia

Effects of Hydroxyapatite in 316L-Titanium Metal Matrix Composites Fabricated by Powder Injection Molding for Bone Implant Application
Faiz Ahmad,
Universiti Teknologi PETRONAS

Advancing PIM Technology for Bone Substitute Fabrication Using Beta-Tricalcium Phosphate
Delphine Auzene,
Critt-MDTS

Session Chair:
Lou Koehler,
Koehler Associates

Compact Vertical Furnace for Iron Powder Reduction and Annealing: Minimum Floor Footprint, Maximizing Energy Efficiency Using Low Reaction Gas and Ensuring Uniform High-Quality Output
Ravindra Kumar Malhotra,
Malhotra Engineers

Integrated Production of High-Purity Copper Powder via Novel Vertical Continuous Chip Oxidation and In-Line Reduction for Precision Sintered PM Components
Ravindra Kumar Malhotra,
Malhotra Engineers

Vertical and Horizontal Continuous Hot-Air Shower Burn-Out Furnace Designs for Lubricant and Carbon Removal to Reclaim PM Green Pre-Mix Scrap Powders
Ravindra Kumar Malhotra,
Malhotra Engineers 

Session Chair:
Sim Narasimhan, FAPMI,
P2P Technologies

Developing an AM-Grade IN617 Feedstock Powder and Assessing its L-PBF Printability for Next-Generation Nuclear Heat Exchangers
Maz Ansari,
InnoTech Alberta

Low Oxygen Spherical Ni- and Cu- Alloy Powder Production for High Temperature Resistant Additive Manufacturing Applications
Chung-Soo Kim,
EML Co., Ltd..

Ultrasonic Atomization: Bridging Process Control and Powder Performance
Roghayeh Nikbakht,
McGill University

Session Chair:
Jason Ting,
Elementum 3D

Surface Roughness Characterization from Computed Tomography Images Using an Enhanced Surface Determination Technique: Case Study of Additively Manufactured Components
Éric Fournier,
École de Technologie Supérieure

A Method for Evaluating NDT Detectability in Additive Manufacturing Aerospace Parts
Salah Eddine Brika,
École de Technologie Supérieure

Implementation of Rapid Fatigue Testing to Evaluate the Effect of Defects and Specimen Thickness on the Fatigue and Fracture Properties of PBF-L/M AlSi10Mg
Milad Bemani Lirgeshas,
Royal Melbourne Institute of Technology (RMIT)

Session Chair:
Jose Muniz,
Equispheres Inc.

AI-Guided Development of Crack-Free Cermets for Laser Powder Bed Fusion
Abu Anand,
Phaseshift Technologies

Knowledge-Informed Graph Attention Networks Enable Defect-Free Alloy Design for Laser Additive Manufacturing
Hao Yu,
Northeastern University

Simulation of Powder Melting Phenomena in Additive Manufacturing Using Lattice Boltzmann Method
Andrew Gillespie,
Purdue University in Indianapolis

Session Chair:
Steven Moseley,
Hilti AG

Wear Evaluation of Cemented Tungsten Carbide with Nanocrystalline FeNiZr Binder
Sean Fudger,
U.S. Army Research Laboratory

Cutting Performance and Wear Evolution of New Generation Cermet Tipped Blades for Handheld Circular Sawing of AISI 304 Stainless Steel
Steven Moseley,
Hilti AG

Effect of Femtosecond Laser Chip-Breaker on WC–TiC–Co/Mo and NbC-TiC/TiCN-Ni based Cutting Inserts during AISI1213 Turning
Rodney Genga
 

Session Chair:
Hennrik Schmidt,
Plansee USA LLC

Production and Characterization of Gas-Atomized Vanadium Alloy Powder as a Foundation for Developing Nanoparticle-Strengthened Fusion First-Wall Materials
Jordan Tiarks,
Ames National Laboratory

Tungsten Integration into Fusion Power Plant Systems
Lauren Garrison,
Commonwealth Fusion

Simulation-Based Large-Scale Fabrication of SMART Components via Field Assisted Sintering Technology (FAST)
Yuanbin Deng
 

Session Chair:
Ma Qian
Royal Melbourne Institute of Technology (RMIT)

Manufacturing and Remanufacturing of Titanium Parts Using Laser-Blown Powder Ded Process
Bhaskar Dutta,
DM3D Technology, LLC

Assessing Ti-6Al-4V Variability Across Powder Manufacturers for Laser Directed Energy Deposition
Francisco Medina,
University of Texas El Paso

A Thermo-Microstructural-Mechanical Modeling Platform for the Optimisation of DED-Wire Printing Protocols
Mathieu Brochu,
McGill University

Session Chair:
George Bernhard,
Consarc Corporation

The Role of Powder Metallurgy in the Manufacturing of Sintered NdFeB Magnets
Judson Marte,
MP Materials

Considerations for Processing Powders for Rare Earth Permanent Magnets
Miranda Vader,
Vulcan Elements

Rare Earth Fluoride Critical To The Permanent Magnet Industry
Kagya Nyanin,
Principal Mineral