Session Chair:
Juan Manuel Ortega, PMTII,
Clarion Sintered Metals Inc.

Surface Modification of Pure Iron Materials Using Iron-High Carbon Alloy Mechanical Alloying Powder
Shigehiro Kawamori,
Tamagawa University

Process-Specific Binder Development for Sinter-Based Manufacturing
Sebastian Hein,
Fraunhofer IFAM

A Metallographic Study of TiFeMn Hydrogen Storage Powders Manufactured Using Multiple Methods
Thomas Murphy, FAPMI,
Hoeganaes Corporation

Session Chair:
Roger Lawcock, FAPMI,
Johnson Electric Canada Ltd.

An Investigation of Component Manufacturing Processes on the Properties of new Developed SMC Material
Zhou Ye,
Höganäs AB

Development of Multiple-Recyclable Soft Magnetic Composite that Contribute to a Sustainable Society
Kosuke Izumiya,
Sumitomo Electric Industries, Ltd.

Sintered Soft Magnetic Alloy Magnetic Properties
Neal Kraus,
Hoeganaes Corporation

Session Chair:
Brian Dalisay
 

Sintering of Bronze & Iron Thin-Wall Bushes via Hot-Air Debinding, Embedded Heaters, Preheated Atmosphere in Low-Height Muffle and Spiral Path Water Flow Controlled Cooling System
Ravindra Kumar Malhotra,
Malhotra Engineers

Optimized Design of a 1,200 °C, 240 kW, 450 mm Mesh-Belt Sintering Furnace for High-Volume PM Valve Seat Production
Ravindra Kumar Malhotra,
Malhotra Engineers

High Temperature Mesh-Belt Sintering Furnace Design With Hot Air Debinding and Refractory Embedded Heaters for Iron and Stainless Steel PM Parts
Ravindra Kumar Malhotra,
Malhotra Engineers 

Session Chair:
Andrew Klein,
Additive Innovations LLC

Exploiting the Potential of Metal Binder Jetting for Medical Technology and Beyond
Kevin Janzen,
Fraunhafer IAPT

Cold Metal Fusion – Applications of Nickelbased Alloys in Oil & Gas and Energy
Christian Staudigel,
Headmade Materials GmbH

Effect of Rare Earth Distribution on Mechanical Properties of Non-Pressure Sintered Al with Low-Rare-Earth-Addition
Yuji Shigeta,
National Institute of Advanced Industrial Science and Technology (AIST)

Session Chair:
Ian McCarthy,
VALIMET Inc.

Simulative Investigation of an Aerostatic-Bearing-Integrated Setter Plate for Friction Reduction During Sintering
Heiko Blunk,
Fraunhofer IAPT

Numerical Modeling of Permeability in LPBF-Fabricated Porous Structures with Process-Induced Porosity
Aazim Lone,
King Fahd Univ of Petroleum & Minerals

Physics-Informed Machine Learning Framework for Prediction and Control in Additive Manufacturing
Tariku Sinshaw Tamir,
King Fahd Univ of Petroleum & Minerals

Session Chair:
Bryan Sherman,
DSH Technologies

Development of the 440 Stainless Steel Series through the Metal Binder Jetting Process
Tim Kriete,
Hoeganaes Corporation 

Impact of Layer Thickness on the High Cycle Fatigue Properties of a PBF-LB Processed High Strength Steel
Satya Chaitanya Vaddamanu,
Chalmers Tekniska Hogskol

Microstructure and Mechanical Properties of Hadfield Steel Produced by Additive Manufacturing
Kerri Horvay,
Hoeganaes Corporation

Session Chair:
Johannes Pötschke,
Fraunhofer IKTS

Interrelation of Secondary Carbides, Sintering Atmosphere, and Crack Propagation in Ti(C,N)-Based Cermets
Angel Biedma, 
Universidad Carlos III de Madrid

Mechanical Microscopy of Hard Ceramic–Metal Composites: From Conventional WC–Co to Alternative Sustainable Systems
Fanny Marvaldi,
Universitat Politècnica de Catalunya

Crystallographic Investigation on Molybdenum/Nickel/Boride-Based Hard Materials
Satofumi Maruyama

Session Chair:
Rafael Cury,
Plansee Tungsten Alloys

Recycling Refractory Metals: Economic and Environmental Benefits of Plasma Atomization
Michael Jaques,
Retech Systems LLC.

Characterization of EIGA-Atomized Tungsten Heavy Alloy Powders
Arun Chattopadhyay,
Amaero Advanced Materials & Manufacturing Inc.

Plasma Atomization of Refractory High-Entropy Alloys
Michael Jacques,
Retech Systems LLC.

Session Chair:
Francisco Medina,
University of Texas El Paso

Novel Approach in Design of Multi-Scale Porous Metamaterials Using Laser Powder Bed Fusion
Rene Lam,
University of Waterloo

Low Cycle and Ultra Low Cycle Fatigue Testing of Thin-Wall Ti–6Al–4V Fabricated by Laser Powder Bed Fusion
Javier Arreguin Zavala,
AP&C, a Colibrium Additive company

No presentation at this time.

 

Session Chair:
Mike Stucky,
Norwood Medical

Cross-Modal Intelligence and Digital Twins: Machine Learning for Monitoring and Optimizing Metal Additive Manufacturing
Mathieu Brochu,
McGill University

Physics-Informed AI Improves Profitability by Optimizing Tooling for Tungsten Carbide Manufacturing
Tevis Jacobs,
Surface Design Solutions

Using AI in Feedstock Development
Bill Thorne,
BASF