Session Chair:
David Morales,
Capstan California

Fabrication of Near-Full-Density 316L Stainless Steel with Mirror-Finish by Powder Design and MIM Process Control
Lanlan Liao,
NBTM New Materials Group Co. Ltd.

Neutron Scattering and Thermodynamic Modelling of Transition Metal Dopant Effects in Cemented Carbides
Ahmet Bahadir Yildiz,
Scatterin AB

Integration of Rheological Measurement into Piston-based Material Extrusion for Metal and Ceramic Injection Molding
Lennard Hermans,
Fraunhofer IAPT

Session Chair:
Andrew Serafini, PMT
Symmco Inc.

“Gettering” Improved Magnetic Properties in Fe-based Soft Magnetic Composites (SMCs): Magnetic Properties Enhancement via an In-Situ Coating Approach
Vignesh Mohan,
TU Wien

Development of Soft Magnetic Composite Materials for Innovative Circuit Designs in Miniaturized, High-Efficiency DC–DC Converters
Minami Akazawa,
Diamet

Performance Enhancement of Soft Magnetic Composites for Passive Applications Using an Innovative Water Based Coating Concept
Axel Persson,
Höganäs AB

Session Chair:
Brian Dalisay
 

Optimization of Sinter-Brazing Process Parameters for Repeatable High-Strength Joints for Mass-Produced Complex PM Components
Sudarshan Palve,
Egearz Pvt Ltd

Binder Enrichment on Carbide Tools to Improve Wettability
Guruprasath Jayachandran,
Kennametal

Investigating the Mechanical Performance and Microstructural Evolution of Functionally Graded (FG) and Non-Functionally Graded (NFG) Titanium Alloys Produced Through Field-Assisted Sintering Technology (FAST)
Joseph Hopkinson,
University of Sheffield

Session Chair:
Katerina Frederick
Westinghouse Electric Co.

Surface-Engineered AM Inconel: PVD Coating Strategies for Enhanced Performance in Severe Operating Conditions
Abul Fazal Arif,
King Fahd Univ of Petroleum & Minerals

Enhancing the High-Temperature Performance of SLM-Fabricated Inconel Components Using Cold Spray Coatings
Abba A. Abubakar,
King Fahd Univ of Petroleum & Minerals

Effect of Process Parameters on the Wear and Corrosion Behavior of Cold-Sprayed Nickel with Aluminum Oxide Composite Coatings on SS304
Raihan Goriya,
King Fahd Univ of Petroleum & Minerals

Session Chair:
Roger Pelletiers,
National Research Council Canada

Eliminating Thermally Induced Porosity: Advances in HIP and High-Pressure Heat Treatment
Chad Beamer,
Quintus Technologies

Additive Manufacturing-Enabled Electroforming for Hot Isostatic Pressing (HIP) Can Production for Near Net Shape
Vanshika Singh,
Oak Ridge National Laboratory

Cold Metal Fusion - Eliminating Laser Sintering Porosity in Green Parts via Cold Isostatic Pressing
Christian Staudigel,
Headmade Materials GmbH

Session Chair:
Jason Mayeur,
Oak Ridge National Laboratory

Improved Mechanical Properties of Metastable Beta Titanium Alloys with Bi-Lamellar Microstructure via Additive Manufacturing
Jingzhe Niu,
Northwest Institute for Nonferrous Metal Research

Study of Microstructure and Mechanical Properties of Metastable Beta Titanium Alloy Manipulation by Electron Beam Powder Bed Fusion
Xuezhe Zhang,
Northwest Institute for Nonferrous Metal Research

Fatigue Properties for High Productivity L-PBF with Ti-6Al-4V
Kevin Janzen,
Fraunhofer IAPT

Session Chair:
Thomas Jewett
 

Effect of WC Extracoarse Grains on the Sinterability of WC-Fe-Ni-Co Cemented Carbides
Tomás Soria Biurrun,
CEIT-BRTA

Formation Mechanism of Plate-Like WC Grain in WC-Co Cemented Carbides Fabricated by Plasma Milling
Min Zhu,
 

Low-Voltage SEM Observation near Fracture Origins in Ultrafine-Grained Cemented Carbides
Masaru Kawakami,
Fujidie Co., Ltd.

Session Chair:
Arun Chattopadyay,
Amaero Advanced Material & Manufacturing, Inc.

Critical Factors Affecting Tungsten’s Ductility through Microstructural and Mechanical Analysis of Annealed Rolled Tungsten
Zak Fang, FAPMI,
University of Utah

High Ductility in As-Sintered Mo Produced by Pressureless Sintering
Ian Dowding,
Foundation Alloy

Small-Scale Mechanical Testing of Novel Tungsten Alloys for Alternate-Energy Applications
Blake Emad,
University of North Texas

Session Chair:
Amir Nobari,
Tekna

Scaling Titanium Alloy Sinter-Based Manufacturing with Spark Plasma Sintering (SPS): Commercial Pathways for High-Performance, U.S.-Based Production
Eric Eyerman,
California Nanotechnologies

On the Mechanical Performance of Functionally Graded Titanium Alloy Powder Consolidated Through Field-Assisted Sintering Technology (FAST)
Martin Jackson,
University of Sheffield

Material Extrusion Based Additive Manufacturing of Ti-6Al-4V Alloy
Animesh Bose, FAPMI,
Shaping Innovations, LLC

Session Chair:
Mark Saline
Gasbarre Thermal Processing Systems

Latent and Ubiquitous AI: The Future of Machinery
Steve Schmid,
University of North Carolina Charlotte

Practical Integration of Machine Learning in Powder Metallurgy and Additive Manufacturing:  Methods, Challenges, and Sustainability
Simon Gelinas,
Laval University 

An Intelligent Framework for Alloy and Process Development: Toward Tailored Tool Steels for Laser Powder-Bed Fusion
Justin Plante,
Laval University