Share Your Expertise at PowderMet2027/AMPM2027

If you are advancing powder metallurgy, particulate materials, metal powders, or metal additive manufacturing, this is your opportunity to put your work in front of the people who can help move it forward.
The U.S. Department of Commerce, through the Economic Development Administration (EDA), intends to award $39.9 million in Disaster Supplemental funding to the DuBois Center for Innovation Regional Manufacturing Hub, DuBois, Pennsylvania. The investment is designed to strengthen advanced manufacturing in Pennsylvania while supporting the region’s economic recovery from Tropical Storm Debby, which caused damage in 2024.
Researchers from North Carolina State University, Raleigh, North Carolina, Oak Ridge National Laboratory (ORNL), Oak Ridge, Tennessee, and equipment manufacturer JEOL Ltd., Tokyo, Japan, have demonstrated that large, additively manufactured tungsten components can withstand the extreme environment inside a fusion reactor.

Share Your Knowledge at the Premier Event on Metal Injection Molding!
The Metal Powder Industries Federation (MPIF) invites you to submit your original presentations for the MIM2027 Conference, happening March 1–3, 2027, in Costa Mesa, California. This annual event is the ultimate platform for professionals to share groundbreaking advancements in injection molding technologies. Present your research in a technical presentation in front of the decision makers of the industry.
Contribute to the future of our industry—submit your insights today!
Over 200 industry professionals, researchers and officials from DOE and DOW attended the 2026 PM-HIP Workshop held November 4-5 at Oak Ridge National Lab (ORNL), Oak Ridge, Tennessee. During the workshop, co-organized with the Metal Powder Industries Federation (MPIF), the delegates learned of the progress being made by manufacturers to advance PM-HIP in the US and Europe. Representatives from DOE and DOW shared national priorities and opportunities for PM-HIP.
Researchers at the University of Maine, led by Bashir Khoda, associate professor of mechanical engineering, have developed a technique for separating valuable metals from cross-contaminated powder mixtures that might otherwise be discarded. The work could ultimately reduce material waste and improve supply-chain resilience for additive manufacturing and other powder-based manufacturing processes.

The Japan Powder Metallurgy Association (JPMA), Tokyo, Japan, announced its 2026 New Design, Process Development, Labor Saving Production, New Powders, and Effort awards.
The Center for Powder Metallurgy Technology met in Detroit recently. The meeting included future application possibilities for PM presentations from George Coppens, Amstead Automotive and Peng Shen, General Motors. Both presentations were extremely well received. Additionally, Pei Sun, University of Utah, presented an update on sustainable iron powder; Brian Uhl, JIT Tool & Die, Inc. presented tool steel alternatives to tungsten carbide; and Charles Joseph, Metal Powder Works, presented novel copper powder developments.
CPMT is holding a membership drive. All new members will be offered a 50% discount for 2027. Contact Wiley Abner at wabner@mpif.org for details.

The 2026 PM Management Summit and 82nd Annual MPIF Business Meeting was held October 24-26 in South Padre Island, Texas. PM industry leaders gathered for the three-day federation meeting, which provided outstanding management presentations, strategic-planning workshop, association meetings, and networking opportunities, in addition to adopting the 2027 MPIF budget as presented.
Stephen L Feldbauer, Abbott Furnace Company, St. Marys, Pennsylvania, has been elected president of the Powder Metallurgy Equipment Association.
S
atyajeet Sharma has been appointed Director of Technical Engagement at Continuum Powders, Houston, Texas.
Callaway Golf Company, Carlsbad, California, has committed $15 million to a new metal additive manufacturing facility in Fort Worth, Texas. The golf club manufacturer plans to develop innovative designs that can’t be achieved by other manufacturing methods.
George Bernhard has been elected as the 22nd President of APMI, succeeding Rob Hayes, Phoenix Sintered Metals LLC. Additionally, Sundar Atre, New Jersey Institute of Technology, Brent Matheson, PMT, Advantage Metal Powders, Inc., John McLelland, Höganäs, and Amir Nobari, Tekna, were elected as first term directors.

The APMI West Penn Chapter held its last meeting of 2026 featuring a technical presentation about the "Production of Non-Atomized Copper Powder via Direct Powder" presented by Charles Joseph from Metal Powder Works. Eighty-six industry professionals attended. The next meeting will be January 14, 2027.
Volume 2, No. 6, September/October 1973

APMI has a rich history that encompasses over sixty years advancing powder metallurgy. Explore the PM Flashback articles for insights into the industry's developments from 10, 20, and 40 years ago.
International Journal of Powder Metallurgy Volume 34, No. 3, 1998

The International Journal of Powder Metallurgy covers various materials and processes. Back in the day, the Consultant’s Corner was a popular feature. Revisit them to learn more about materials and processes.