Session Chairman: Jason Ting, Thermal Technology LLC
No Presentations Scheduled at This Time
065
Australia
8:25 a.m.
The Evolution of Hot Isostatic Pressing for the Treatment of Radioactive Wastes Salvatore (Sam) Moricca, AMEPT LLC
079-R
USA
8:50 a.m.
The Influence of Hot Isostatic Pressing (HIP) and Heat Treatment on the Microstructure and Properties of PBF IN718 Magnus Ahlfors, Quintus Technologies
Session Chairman: Thomas Jewett, Global Tungsten & Powders Corporation
082
8:00 a.m.
Additive Manufacturing of Polymer Derived Ceramics Xuehui Yang, Indiana University—Purdue University Indianapolis (IUPUI)
066
Germany
On the Metallurgy and Manufacture of Cast Metallic Heat Resistant Alloys as Components for Powder Processing Applications Shankar Venkataraman, Schmidt + Clemens Group
286
Poland
U-FAST: An Upgraded Method to Sintering of Powder Materials Damian Matewski, GeniCore
Session Chairman: Dustin Yetzer, Abbott Furnace Company
013
Canada
For Powder Bed Additive Manufacturing Process: Correlations Between Single Layer Density and Powder Properties with the Assistance of Coherence Scanning Interferometry Basel Alchikh-Sulaiman, McGill University
075
The Influence of Precursor Derived Secondary Structures on the Sintering Behavior of Binder Jet 3D Printed Titanium Dioxide Lynnora Grant, Rice University
145
Loose Powder Sintering: An Overview of Densification Behavior Pore Formation of Copper and 435 Steel Powders Arun K. Chattopadhyay Uniformity Labs
Session Chairman: Richard Walker, Pressure Technology, Inc.
083-R
9:30 a.m.
Manufacturing Methods for High-Density Powdered Metal (PM) Applications and Their Effect on Mechanical Properties Amber Tims, PMT North American Höganäs Co.
064
Malaysia
9:55 a.m.
A Preliminary Process for Incorporation of Graphene Reinforcement in Copper-Based Feedstock Faiz Ahmad, Universiti Teknologi PETRONAS (UTP)
135-R
10:20 a.m.
Effects of Sintering Conditions on the Diffusion Bonding of AgC-Cu Electrical Contacts Daudi R. Waryoba, The Pennsylvania State University
Session Chairman: Jerry Falleur, PMT, AAM—Powertrain
126
Switzerland
A Revolutionary Approach to Tooling Changeover on Multi-Level Presses Guillermo Polo, Osterwalder Inc.
005
Room Temperature Compaction for Higher Density in Powder Metal Parts, +325 Compaction Kalathur S. Narasimhan, FAPMI, P2P Technologies
171
Modern Automation Systems for Powder Compaction Presses Nicolas Hemmer, KOMAGE Gellner Maschinenfabrik KG
Session Chairman: Robert Hayes, Phoenix Sintered Metals LLC
124
Spain
Methods for the Reduction of the Friction Coefficient of Sintered Bushings Mark J. Dougan, AMES PM Tech Center
176
Wear Resistance and Mechanical Properties of PM Alloy Materials Arthur E. Jones, Symmco Inc.
187-R
High-Strength Aluminum-Zinc Composite PM Grade with Trace Amount of Copper for Powder Metallurgy Applications Jessu Joys, United States Metal Powders, Inc.
Session Chairman: Jessu Joys, United States Metal Powders, Inc.
038
11:00 a.m.
3D Digital Image Correlation: The Ultimate Tool for Displacements and Strains Testing Charles-Olivier Amyot, Trilion Quality Systems
043
11:25 a.m.
Powder Properties Characterization of PM Lubricants Using FT4 Powder Rheometer Jean V. Reid, H.L. Blachford Ltd.
023
11:50 a.m.
Using Powder Rheology Measurements to Optimize the Mixing Time of an Iron-Based Premix for Best Die-Filling Performance Boris Nijikovsky, Université du Québec
Session Chairman: Jon Lyons, III, Line Craft, Inc.
030
Effect of Hybrid Post-Sinter Treatment on Sinter Hardened (SH) Structural Parts from PM Steels Leonid I. Frayman, Allegheny Coatings/Pamlico Coatings Group
070
Effect of Carbon Content on the Machinability of Powdered Metal Copper Steels Cody Kalinoski, Engineered Sintered Components
012
Study on Corrosion Performance and Microstructure of Sinter Hardened Artifacts Subjected to Various Finishing Leonid I. Frayman, Allegheny Coatings/Pamlico Coatings Group
Session Chairman: Arthur E. Jones, Symmco, Inc.
139
Contaminated Cartridge-Type Dust Collectors May Pose Serious Health and Environmental Risks Michael W. Seitz, BlueSky Global
150
Metal Powder Recycling—Closing the Loop on Sustainability Josh Lifshitz, Globe Metal
175
Talent Acquisition, Utilization and Retention in the PM Industry...It’s Time to End the Recycle Rocco Petrilli, PKPM Advisory Group
Phone: (609) 452-7700
Email: info@mpif.org