Session Chairman: Craig Stringer, Atlas Pressed Metals
185
USA
9:30 a.m.
Development of High-Strength PM Alloy That Competes with Wrought 8620 Alloy in Structural Applications Brad Morningstar, MPP
182
9:55 a.m.
Fatigue Performance of a Sinter-Hardened Powdered Metal Steel Ian Donaldson, FAPMI, GKN Sinter Metals
119
10:20 a.m.
Effect of Reducing Nickel in Current PM Materials Neal Kraus, Hoeganaes Corporation
Session Chairman: John Meyer, Carpenter Technology Corporation
103
Production and Characteristics of Atomized Submicrometer Alloy Powders Randall M. German, FAPMI, German Materials Technology
133
Comparison of Simulated and Experimental Observations of Pure Ni Gas Atomization: Surrogate for Development of Parameters to Produce Ni-Base Superalloy Feedstock Powders for AM Trevor M. Riedemann, Ames Laboratory (USDOE)
147
Results of Satellite Reduction Strategy on Gas-Atomized Powder Quality for Additive Manufacturing Iver E. Anderson, FAPMI, Ames Laboratory (USDOE)
Session Chairman: Kester Clarke, Colorado School of Mines
158
Controlled Atmosphere Technologies for Sintering High-Quality Components by Proper Lubrication and Lean Sintering Atmospheres Akin Malas, Linde LLC
186
A Review of Lubricant Removal Systems and the Latest Technology Stephen L. Feldbauer, Abbott Furnace Company
059
India
Precision Bronze Sintering Furnace Design Ravi P. Malhotra, Sr., Malhotra Engineers
Session Chairman: Mark J. Dougan, AMES PM Tech Center
184
Germany
3:00 p.m.
The Support Effect and Its Impact on the Design of Complex-Shaped Sintered PM Parts Markus Schneider, GKN Sinter Metals
014
3:25 p.m.
The Effect of Laser Engraving on the Mechanical Behavior of Powder Metallurgy Components Katrina S. Johnston, Drexel University
096
3:50 p.m.
Production Experience with Enhanced Ferro-Phosphorus Material Showing Reduced Tool Wear Alex Wartenberg, Hoeganaes Corporation
Session Chairman: Arun Chattopadhyay, Uniformity Labs
035
Canada
Demystifying the Mechanisms of Liquid Metal Disintegration: a 3D CFD Analysis of Water Droplet Impingement on Melt Stream Cheng-Tse Wu, University of Toronto
166
In Situ Gas-Phased Passivation of Low-Pressure Gas-Atomized Calcium Powder Charles Czahor, Iowa State University/Ames Laboratory
170
The Effect of Pour Tube Tip Extension on Close-Coupled Gas Atomization Die Flow David J. Byrd, Ames Laboratory (USDOE)
Phone: (609) 452-7700
Email: info@mpif.org