Session Chairman: Julie Campbell-Tremblay, PMT, Rio Tinto Metal Powders
083
USA
8:00 a.m.
Manufacturing Methods for High-Density Powdered Metal (PM) Applications and Their Effect on Mechanical Properties Amber Tims, PMT, North American Höganäs Co.
168
Canada
8:25 a.m.
Optimization of Liquid-Phase Sintering of Boron PM Steels Using Master Alloys Simon Gelinas, Université Laval
183
8:50 a.m.
A Method to Estimate Fatigue Axial Properties for Ferrous Powder Metal Materials Virgiliu A. Savu, GKN Sinter Metals
Session Chairman: Michael Wiseman, ARC Group Worldwide
057
Simulation and Experimental Verification of Two Cavity Balance in Injection Molding Neal S. Myers, Kennametal, Inc.
016
5 Reasons to Celebrate Mold Cleaning in Power Injection Molding Steve Wilson, Cold Jet LLC
200
United Kingdom
Developments in High-Temperature Nickel Alloys for MIM Applications Martin A. Kearns, Sandvik Osprey Limited
Session Chairman: Raymond Serafini, PMT, Messer LLC
068
Commercial Sintering of Chromium Powder Metallurgy (PM) Steels Roland T. Warzel III, North American Höganäs Co.
135
Effects of Sintering Conditions on the Diffusion Bonding of AgC-Cu Electrical Contacts Daudi R. Waryoba, The Pennsylvania State University
187
High-Strength Aluminum-Zinc Composite PM Grade with Trace Amount of Copper for Powder Metallurgy Applications Jessu Joys, United States Metal Powders, Inc.
Session Chairman: Amber Tims, PMT, North American Höganäs Co.
097
10:30 a.m.
Advanced Material Options for High-Temperature Sintering Neal Kraus, Hoeganaes Corporation
028
10:55 a.m.
The Effect of Sintering Temperature on the As-Sintered and Heat Treated Properties of Pre-Alloyed Mo Low-Carbon Steel Alloyed with Ferromanganese Peng Shen, Stackpole International
130
11:20 a.m.
Fatigue and Fracture Behavior of Solid- and Liquid-Phase Sintered Fe PM Samples with C, Ni and Cu Additions and Comparisons with Fatigue and Fracture Behavior of AM Coupons Daudi R. Waryoba, The Pennsylvania State University
Session Chairman: Stefan Joens, Elnik Systems, LLC
280-R
Combining Good Corrosion Resistance and Mechanical Properties William Thorne, BASF
055
The Effects of Sintering Temperature on the Microstructural Evolution of 718 Rees Jones, ARC Group Worldwide
138
Optimizing Extrusion Process Using Water Atomized 17-4 Stainless Steel Powders Jian Zhang, Indiana University—Purdue University Indianapolis (IUPUI)
Session Chairman: Beth Hinchliffe, Catalus Corporation
063
Numerical Simulation of Close-Coupled Gas Atomization: Impact of Geometric and Fluid Parameters Franz Hernandez, Ames Laboratory (USDOE)
165
Powder Flow in Additive Manufacturing—Challenges and Opportunities Andres D. Orlando, Jenike & Johanson, Inc.
031
Importance of Particle-Size Distribution and Thermal Stress Factors—A Theoretical Approach to Predict Defects in AM Parts Arun K. Chattopadhyay, Uniformity Labs
Session Chairman: Bo Hu, North American Höganäs Co.
061
3:15 p.m.
Investigation of Powder Processing, Heat Treating, and Texturing to Improve Gas-Atomized Alnico Magnets for Use in Electric Drive Motors Emily A. Rinko, Iowa State University
132
3:40 p.m.
Multistage Foaming of Powder Particles for Structural and Functional Applications Samuel Brennan, Millersville Univeristy
044
4:05 p.m.
Results of Experiments with Cold Spray Deposition of Fe-Based ODS Alloys Using As-Atomized Spherical GARS Powder Rebecca Whitesell, Iowa State University
Session Chairman: Robert Dowding, U.S. Army Research Laboratory
104
Microgravity Liquid-Phase Sintering Randall M. German, FAPMI, German Materials Technology
156
Spark Plasma Sintering of Tungsten and Lanthanated Tungsten John L. Johnson, FAPMI, Elmet Technologies LLC
049
Manipulating Bimodal Grain-Size Distribution to Enhance Material Properties in a Spark Plasma Sintered Nanostructured FeNiZr Alloy Sean Fudger, U.S. Army Research Laboratory
Session Chairman: George Coppens, Means Industries
148
Italy
The Analysis of the Densification Curve of Metallic Powders in Uniaxial Cold Compaction Alberto Molinari, FAPMI, University of Trento
149
A Design Procedure to Define the Optimum Hardness of Parts Subject to Contact Stresses Alberto Molinari, FAPMI, University of Trento
090
Computational Modeling of Thermophysical Properties of Silica Reinforced Porous Anodized aluminum (SiRPA) based Thermal Swing Coating Abhilash Gulhane, Indiana University—Purdue University Indianapolis (IUPUI)
Phone: (609) 452-7700
Email: info@mpif.org