X

Tuesday WorldPM2020 Technical Program

WorldPM2020 Technical Session Banner

Tuesday, June 30

TECHNICAL SESSIONS

 

 

WorldPM2020 TECHNICAL SESSIONS

Tuesday Morning

9:15–10:30 a.m.

 

  • Presentation numbers are listed before the author’s country identification.
  • Encore presentations will be indicated by having an "R" listed after the presentation number.

SESSION 25
Testing and Evaluation

Session Chair:
Arthur Jones
Symmco, Inc.

103

Canada

915 a.m.

The Implementation of New Advanced Electron Microscopy Techniques for a Detailed Characterization of Powders and PM/AM Parts
Olivier Girard,
Polytechnique Montréal

 

9:40 a.m.

No presentation scheduled at this time.

236

USA

10:05 a.m.

Baseline Study of Corrosion Performance of Standard PM Stainless Steels
Kurt Diehl,
Penn State DuBois


SESSION 26
Atomization Modeling

Session Chair:
Brian Pittenger
Jenike & Johanson, Inc.

493-R

Finland

9:15 a.m.

Coupling-Phase Field Method and Crystal Plasticity for Modeling Rapid Solidification of 316 Stainless Steel and the Significance of Processing to Microstructure and Strengthening
Matti Lindroos,
VTT Research Centre of Finland

120

Austria

9:40 a.m.

About the Complexity of Producing Spherical Metal Powders
Martin Dopler,
Metalpine GmbH

213

Canada

10:05 a.m.

The Disintegration of a Melt Stream and the Rapid Solidification of Melt Droplets During Water Atomization
Ali Asgarian,
University of Toronto


SESSION 27
Temperature-Driven Results in Sintering

Session Chair:
Cody Kalinoski
Engineered Sintered Components

160

USA

9:15 a.m.

Ultra High-Temperature Sintering: The Benefits and Potential PM Opportunities
Francis Hanejko,
Horizon Technology

515

Canada

9:40 a.m.

The Effect of Elevated-Sintering Temperature on the Microstructures and Mechanical Properties of Low-Alloy PM Steels
Paul Tallon,
Stackpole International

 

 

10:05 a.m.

No presentation scheduled at this time.


SESSION 28
MIM: Advanced Alloys

Session Chair:
John Gaspervich
Veloxint Corporation

420

USA

9:15 a.m.

The Effects of Hot Isostatic Pressing on the Microstructure of Metal Injection Molded 718
Rees Jones,
ARC-Colorado

282

Germany

9:40 a.m.

Influence of Residual Porosity and Oxygen Content on Fatigue Properties of MIM Ti-6Al-7Nb
Thomas Ebel,
Helmholtz-Zentrum-Geesthacht

267

Germany

10:05 a.m.

High-Cycle Fatigue Behavior of Metal Injection Molded Metastable Beta Titanium
Peng Xu,
Helmholtz-Zentrum-Geesthacht


WorldPM2020 TECHNICAL SESSIONS

Tuesday Morning

10:45 a.m.–Noon

 

SESSION 29
Friction and Wear

Session Chair:
Thomas Stephenson
Rio Tinto Metal Powders

508

USA

10:45 a.m.

Wear and Friction Comparison of Sintered Metallic and Organic Brake Materials
Mark Assel,
Carlisle Brake & Friction

524

USA

11:10 a.m.

Plasma Nitriding Mechanisms of Low-Density Sintered Metal Products
John Ludeman,
Advanced Heat Treat Corp.

225

China

11:35 a.m.

Effect of Different Shapes of Graphite on the Friction and Wear Properties of Copper-Based Brake Materials for High-Speed Railway Trains
Peng Zhang,
University of Science and Technology Beijing


SESSION 30
Powder Flow and Compaction

Session Chair:
Hyrum Lefler
Carpenter Technology Corporation

370

Canada

10:45 a.m.

Relationship Between Segregation and Powder Handling System Design
Mursal Ashrafi,
Jenike & Johanson, Ltd

464

Canada

11:10 a.m.

On the Numerical Integration of a Piston-Equation and Its Relation to Compactability and Compressibility
Gholamreza Aryanpour,
University of Quebec at Chicoutimi

332

Italy

11:35 a.m.

Warm-Die Compaction of Low-Alloy Steel Powder Mix: Compaction Mechanics and Densification
Ilaria Cristofolini,
University of Trento


SESSION 31
Spark Plasma Sintering

Session Chair:
Mark Saline
Gasbarre Products, Inc.

034

Poland

10:45 a.m.

Association of SPS and KOBO Extrusion Technologies for Nanostructured Aluminum-Based Composites Manufacturing
Dariusz Garbiec,
Metal Forming Institute

156

Poland

11:10 a.m.

Compaction and Spark Plasma Sintering of Thermal Protection Systems of Complex-Shaped Sintering Mechanism and Effect of Feedstock Composition
Volf Leshchynsky,
Metal Forming Institute

425

China

11:35 a.m.

Supersaturated Solid-Solution of Immiscible Mg in Ti Matrix Using Powder Metallurgical Approach for Enhanced In Vitro and In Vivo Osteogenesis
Luxin Liang,
State Key Laboratory of Powder Metallurgy, Central South University


SESSION 32
MIM: Simulation and Tooling

Session Chair:
Emil Inarda
Ormco

218

Canada

10:45 a.m.

Impact of Rheological Model Used in Simulation of Low-Pressure Powder Injection Molding
Raphaël Côté,
École de Technologie Supérieure

292

Germany

11:10 a.m.

Simulation and Experimental Verification of the PIM Mold-Filling Process
Volker Piotter,
Karlsruhe Institute of Technology

090

Denmark

11:35 a.m.

Rapid Tooling Development With Freeform Injection Molding for MIM
Uffe Bihlet,
AddiFab


WorldPM2020 TECHNICAL SESSIONS

Tuesday Afternoon

2:15–3:30 p.m.

 

SESSION 33
Iron and Steel

Session Chair:
Julie Campbell Tremblay, PMT
Rio Tinto Metal Powders

184

India

2:15 p.m.

Diffusion-Alloyed Powders With Higher Density for Automotive Applications
Pavan Kumar Kandregula,
Sundram Fasteners Limited

098

Japan

2:40 p.m.

Influence of the Microstructure on Tensile Strength of As-Sintered Steel Made of Cu-Mo Pre-Alloyed Steel Powder
Nao Nasu,
JFE Steel Corporation

319

Japan

3:05 p.m.

Evaluation of Dispersibility for Copper and Iron Powder Mixture
Kazuyoshi Sawada,
Kobe Steel, Ltd.


SESSION 34
Sintering: Modeling

Session Chair:
Cèsar Molins, FAPMI
AMES S.A.

071

Japan

2:15 p.m.

Simulation of Anisotropic Sintering of Elliptical Particles by Combined PFM/DEM Approach
Toshiki Ikeda,
Kyushu University

112

Japan

2:40 p.m.

A Combined Multiphase-Field/Discrete-Element Method for Sintering of Blended Elemental Powders
Kazunari Shinagawa,
Kyushu University

297

Germany

3:05 p.m.

A Digital Twin of a PM Gear Manufacturing Chain
Christoph Broeckmann,
IWM at RWTH Aachen University


SESSION 35
Densification I: Alloying Technology

Session Chair:
Sindy Zeng
Veloxint Corporation

 

2:15 p.m.

No presentation scheduled at this time.

518

Mexico

2:40 p.m.

Effect of CoCrMo Addition on Sintering Kinetics, Mechanical Properties and Corrosion Resistance of Ti-6Al-4V/CoCrMo Composites Processed by Semi-Solid Sintering
Elena Mihalcea,
TecNM/Instituto Tecnológico de Morelia

 

3:05 p.m.

No presentation scheduled at this time.


SESSION 36
Titanium Material Properties I

Session Chair:
Serge Grenier
Rio Tinto Metal Powders

136

New Zealand

2:15 p.m.

Mechanical Properties of Low-Cost Ti-6Al-4V Alloy Produced by an Industrial Scale Extrusion
Ajit Pal Singh,
The University of Waikato

286

Germany

2:40 p.m.

Effect of Oxygen Scavenging by Yttrium Addition on Fatigue Properties of MIM Ti-6Al-4V Using HDH-Powder
Wolfgang Limberg,
Helmholtz-Zentrum Geesthacht

063

China

3:05 p.m.

Selective Laser Melting of CP-Ti to Subdue the Low-Cost, High-Performance Trade-Off
Gang Chen,
University of Science and Technology Beijing


WorldPM2020 TECHNICAL SESSIONS

Tuesday Afternoon

3:45–5:00 p.m.

 

SESSION 37
Light Alloys

Session Chair:
Ian Donaldson, FAPMI
GKN Sinter Metals

251

USA

3:45 p.m.

Magnesium and Magnesium Alloy Powder Processing Towards the Development of Near Shape Structural Materials
Steven Johnson,
Central Connecticut State University

531

USA

4:10 p.m.

Introduction of High-Strength 6000 Series Metal Matrix Composite (MMC) Aluminum PM Grade
Jessu Joys,
United States Metal Powders, Inc.

313

China

4:35 p.m.

Corrosion Resistance of High-Strength 5083 Aluminum Alloy by PM
Weihao Han,
Institute for Advanced Materials and Technology


SESSION 38
Materials Design: Modeling

Session Chair:
Gilles L’Esperance, FAPMI
École Polytechnique de Montréal

089

Australia

3:45 p.m.

A Computational Framework for Designing Sintered Materials
Graham Schaffer, FAPMI,
The University of Melbourne

367

Sweden

4:10 p.m.

Alloys by Design: Combining Computational Methods and Experiments to Develop New Alloys
Karin Frisk,
Höganäs AB / Chalmers University of Technology

128

Japan

4:35 p.m.

The Influence of Cu Pre-Alloying and Its Precipitating Behavior on the Compressibility and Hardenability of Fe-Mo Alloyed Steel Powder
Takuya Takashita,
JFE Steel Corporation


SESSION 39
Densification II: Novel Processing Technologies

Session Chair:
Stefan Joens
Elnik Systems, LLC

445

USA

3:45 p.m.

Analysis of Densification and Distortion Differences Associated with Gravity
Randall German, FAPMI,
German Materials Technology

 

4:10 p.m.

No presentation scheduled at this time.

087

Malaysia

4:35 p.m.

Influence of Sintering Parameters on Magnetic Properties of Fe–50Ni Soft Magnetic Alloy by Powder Injection Molding
Faiz Ahmad,
Universiti Teknologi PETRONAS, Malaysia


SESSION 40
Titanium Material Properties II

Session Chair:
Roger Neyman
Catalus Corporation

164

Japan

3:45 p.m.

Strengthening Behavior of PM Ti Alloys With O And Zr Solid-Solution Elements
Katsuyoshi Kondoh,
Osaka University

110

Japan

4:10 p.m.

Acicular Microstructures Formation and Strengthening Behavior of PM Ti-Fe Alloys with Solid-Solution Zr Elements
Takuma Teramae,
Osaka University

026

China

4:35 p.m.

Effect of Compaction Pressure on the Mechanical Properties and Microstructure of Ti-423 Extrusion Rod
Mojtaba Najafizadeh,
Shanghai Jiao Tong University