X

Monday WorldPM2020 Technical Program

WorldPM2020 Technical Session Banner

Monday, June 29

TECHNICAL SESSIONS

 

 

WorldPM2020 TECHNICAL SESSIONS

Monday Morning

8:00–9:15 a.m.

 

  • Presentation numbers are listed before the author’s country identification.
  • Encore presentations will be indicated by having an "R" listed after the presentation number.

SESSION 13
Superalloys

Session Chair:
James Brancho
Titan International

078

Spain

8:00 a.m.

High-Entropy Alloys: A New Opportunity for the PM Route
Jose Torralba, FAPMI,
Universidad Carlos III de Madrid

382

USA

8:25 a.m.

Chromium-Based Alloys for Structural Applications
Luke Jorgensen,
Veloxint Corporation

494

Spain

8:50 a.m.

Understanding the Miscrostructure of PM Co-Based Superalloys for High-Temperature Applications
Jose Torralba, FAPMI,
Universidad Carlos III de Madrid


SESSION 14
Advances in Sintering Atmospheres

Session Chair:
Thomas Philips
Air Products and Chemicals, Inc.

 

8:00 a.m.

No presentation scheduled at this time.

353

USA

8:25 a.m.

Post-Process Grain Refinement of Additively Manufactured Ti-6Al-4V Using Hydrogen Processing
Matthew Dunstan,
U.S. Army Research Lab

206

India

8:50 a.m.

Sinter (Bainite) Hardening of PM Parts by Hot-Gas Quenching
Narasimhan Gopinath,
Fluidtherm Technology Pvt Ltd


SESSION 15
Fatigue Properties

Session Chair:
Joseph Hinchliffe, PMT
Catalus Corporation

534

USA

8:00 a.m.

Assessment of Ferrous Powder Metal Fatigue
Ian Donaldson, FAPMI,
GKN Sinter Metals

076

USA

8:25 a.m.

Determination of Fatigue Life Parameters Using Fatigue Damage Residuals for PM Materials
Virgiliu-Adrian Savu,
GKN PM

126

Germany

8:50 a.m.

Effect of Highly Loaded Volume on the Fully Reversed Fatigue Strength of Heat Treated Fe-Cu-C Steels
Karl Burkamp,
IWM RWTH Aachen University


SESSION 16
Secondary Operations II

Session Chair:
Leonid Frayman
Allegheny/Pamlico Coatings

264

India

8:00 a.m.

A Process for Effective Sealing of PM Parts
Narasimhan Gopinath,
Fluidtherm Technology Pvt Ltd

 

8:25 a.m.

No presentation scheduled at this time.

209

Taiwan

8:50 a.m.

The Relationship Between Density and Dimension Changes Within Cold-Calibration Process
Wei-Ping Huang,
Porite Taiwan Co., Ltd.


WorldPM2020 TECHNICAL SESSIONS

Monday Morning

10:30–11:45 a.m.

 

SESSION 17
MIM: Feedstock

Session Chair:
Lane Donoho, PMTII
Advanced Metalworking Practices, LLC

027

Canada

10:30 a.m.

Development and Characterization of Water-Atomized Iron-Based Feedstock for Metal Injection Molding
Atefeh Ayatollahi Tafti,
École de technologie supérieure (ETS)

065

Germany

10:55 a.m.

Unraveling the Homogeneity of MIM Feedstock
Sherif Madkour,
BASF SE

461

USA

11:20 a.m.

Revolutionary New Technology to Produce Large Parts via Metal Injection Molding
Kurt Heikkila,
Tundra Innovations


SESSION 18
Sintering Furnace Optimization

Session Chair:
Jeffrey Danaher
Abbott Furnace Company

528

USA

10:30 a.m.

Temperature Measurement Within Retort Based Partial Furnace, Using Non-Electric Ceramic Device: A Follow Up Study
Stefan Joens,
Elnik Systems, LLC

373

Netherlands

10:55 a.m.

New Tools for Iron Sinter Process Monitoring – XRD in Combination with Statistical Methods
Uwe Konig,
Malvern Panalytical

472

India

11:20 a.m.

Optimising Sintering Furnace Design and Operating Parameters for Best Results
Ravi Malhotra,
Malhotra Engineers



SESSION 19
Advanced Nano Materials: Processing

Session Chair:
Maria Sawford
Carpenter Technology Corporation

516

USA

10:30 a.m.

HIP of Near-Net-Shape Parts From Cost-Efficient Plasma Atomized Ti- and Ni-Based Alloys
Victor Samarov,
Synertech PM Inc.

091-R

Germany

10:55 a.m.

Generating Advanced Battery Materials With Pulsating Gas Powder Synthesis
Thomas Jähnert,
Glatt Ingenieurtechnik GmbH

300-R

USA

11:20 a.m.

Preparation of Uniform Metallic, Metallic Oxide and Organic Conductive Nanoparticles
Daniel Andreescu,
Clarkson University


WorldPM2020 TECHNICAL SESSIONS

Monday Afternoon

3:15–4:30 p.m.

 

SESSION 20
Powder Production: Modeling

Session Chair:
Emma White
Ames Laboratory

268

United Kingdom

3:15 p.m.

CFD Modeling of Two-Phase Flow in High-Pressure Gas Atomization
Andrew Mullis,
University of Leeds

317

India

3:40 p.m.

Development of Spheriodization Process for Electrolytic Dendritic Iron Powders
Jay Runwal,
College of Engineering Pune

265

United Kingdom

4:05 p.m.

Direct Quantification of Energy and Momentum Transfer During High-Pressure Gas Atomization
Andrew Mullis,
University of Leeds


 

SESSION 21
Compaction & Properties

Session Chair:
Deborah Blaine
Stellenbosch University

272

France

3:15 p.m.

Comparative Evaluations of Frictional Characteristics of Commercial PM Lubricants in an Iron-Based Mixture Under Different Pressure and Temperature Conditions
Barthelemy Harthong,
University of Grenoble

035

France

3:40 p.m.

Discrete and Finite Element Simulation of the Mechanical Behavior of Composite Refractory Powder Products
Julia Cristina Guimaraes de Carvalho Bonaldo,
Vesuvius and Grenoble INP

362

Sweden

4:05 p.m.

A Finite Element-Based Model of the Influence of Density on PM Mechanical Properties
Michael Andersson,
Höganäs AB


 

SESSION 22
Liquid-Phase Sintering

Session Chair:
Joshua Hume
Nichols Portland LLC

158

Canada

3:15 p.m.

Reaching Near-Complete Homogenization of Nickel and Manganese in Liquid-Phase Sintered PM Steels
Simon Gélinas,
Université Laval

338

Spain

3:40 p.m.

Towards the Improvement of Dimensional Control in FeCuC Steels
Jose Antonio Calero,
AMES

487

Spain

4:05 p.m.

Liquid-Phase Sintering of La-Fe-Si-Co Magnetocaloric Powders
Jose Martin,
CEIT


 

SESSION 23
MIM: Processing

Session Chair:
Michael Wiseman
ARC Group Worldwide

129

Canada

3:15 p.m.

Review of Low-Pressure Powder Injection Molding: A Cost-Effective Way to Manufacture Intricate Parts
Vincent Demers,
ETS

073

USA

3:40 p.m.

The Impact of Powder Size on Mechanical Properties and Examples of Manufactured Parts with Alloys 316L and Inconel 718
Jean-Francois Leon,
Galtenco Technology

079

Spain

4:05 p.m.

Development of Powder Injection Molding Process of Cobalt-Free Diamond Composite for Cutting-Tool Applications
Iñigo Agote,
TECNALIA Research & Innovation


 

SESSION 24
Materials: From AM to PM

Session Chair:
Kester Clarke
Colorado School of Mines

181

USA

3:15 p.m.

Higher Density PM Parts by Cold Compaction
Kalathur Narasimhan, FAPMI,
P2P Technologies

446

China

3:40 p.m.

Microstructure and Properties of High-Manganese Non-Magnetic Steel
Chongxi Bao,
NBTM New Materials Group Co. Ltd.

578

USA

4:05 p.m.

Gas-Phase Chemical Surface Modification of Powders at Tons Per Day Scale
Daniel Higgs,
Forge Nano