X

Monday AMPM2020 Technical Program

AMPM2020 Technical Sessions Banner

Monday, June 29

TECHNICAL SESSIONS

 

 

AMPM2020 TECHNICAL SESSIONS

Monday Morning

8:00–9:15 a.m.

 

  • Presentation numbers are listed before the author’s country identification.
  • Encore presentations will be indicated by having an "R" listed after the presentation number.

SESSION A15
Laser AM I: Al Alloys I

Session Chair:
Joseph Capone
Ametek Inc.

290

Canada

8:00 a.m.

AM of Al-Cu Alloys Using the Laser Powder Bed Fusion Process
Satish Tumulu,
McGill University

454

USA

8:25 a.m.

Metal AM Aluminum Alloy Development
Prabir Chaudhury,
Divergent 3D

 

8:50 a.m.

No presentation scheduled at this time.


SESSION A16
High-Alloy Steel

Session Chair:
Joseph Tunick Strauss, FAPMI
HJE Company, Inc.

 

8:00 a.m.

No presentation scheduled at this time.

229

Germany

8:25 a.m.

BASF Ultrafuse 316L: Parametric Optimization of 316L Stainless Steel Components
James Pitts,
BASF 3D Printing Solutions

392

USA

8:50 a.m.

Study of Gas Entrapment and Its Effects on Porosity in 17-4 PH Atomized-Powder AM Parts
Elizabeth Larson,
Carpenter Technology Corporation


SESSION A17
Powder Feedstock:
Microstructure I

Session Chair:
Cindy Freeby
Ametek Inc.

241

USA

8:00 a.m.

Understanding Powder Microstructure for Improvement of AM Performance
Kyle Tsaknopoulos,
Worcester Polytechnic Institute

341

Portugal

8:25 a.m.

Industrial Steel Chips to Powder for AM
Catarina Batista,
CDRSP - Center for Rapid and Sustainable Product Development

058

South Africa

8:50 a.m.

Powder Consideration for SLM In-Situ Alloying
Makoena Botete,
Stellenbosch University


SESSION A18
AM Process Monitoring & Control

Session Chair:
Thomas Pfingstler
Atlas Pressed Metals

529

Finland

8:00 a.m.

Utilization of Digital Twin Quality Assurance of Metal AM
Juha Kotila,
EOS Finland

203

United Kingdom

8:25 a.m.

Quantitative Analysis of the Influence of Process Parameters on an AM Nickel-Based Superalloy
Hani Hilal,
Swansea University

144

Russia

8:50 a.m.

Influence of Additional Heating During Laser Powder Bed Fusion on Mechanical Properties the Ni-Al Intermetallic Phases
Igor Shishkovsky,
Skolkovo Institute of Science and Technology


AMPM2020 TECHNICAL SESSIONS

Monday Morning

10:30–11:45 a.m.

 

SESSION A19
Laser AM II: Al Alloys II

Session Chair:
Iver Eric Anderson, FAPMI
Ames Laboratory

042

France

10:30 a.m.

Structural Aluminum Alloy Processed by Laser Beam Melting: A Fundamental Understanding of Hot Cracking
Akash Sonawane,
CEA (French Alternative Energies and Atomic Energy Commission)

364

Canada

10:55 a.m.

AM of F357 Aluminum Alloy Processed Using Laser Powder Bed Fusion
Jaskaranpal Dhillon,
McGill University

390

Canada

11:20 a.m.

Laser Powder Bed Fusion of AlSi10Mg with Large Particle-Size Distribution
Tiffany Turner,
McGill University


SESSION A20
LPBF Steels I

Session Chair:
Jessu Joys
United States Metal Powders Inc.

410

USA

10:30 a.m.

Effects of Powder Characteristics on Super-Duplex Stainless Steel Fabricated by Laser Powder Bed Fusion
Arulselvan Arumugham Akilan,
University of Louisville

 

10:55 a.m.

No presentation scheduled at this time.

190

Canada

11:20 a.m.

Mechanical Performance of Laser Powder Bed Fusion Printed Fe-0.8Mo-0.6C Compared to MPIF 35 FL-4405-175HT Requirements
Allan Rogalsky,
University of Waterloo


SESSION A21
Powder Feedstock:
Microstructure II

Session Chair:
Brad Richards
Ametek Inc.

363

Swden

10:30 a.m.

Powder Recycling in Powder-Based Metal AM From the Surface Chemistry Point of View: An Overview
Eduard Hryha,
Chalmers University of Technology/Centre for Additive Manufacturing - Metal (CAM2)

597

USA

10:55 a.m.

Pre-Processing of Recycled Stainless Steel Powder for Cold Spray Applications
Christopher Massar,
Worcester Polytechnic Institute

081

USA

11:20 a.m.

An Evaluation of Gas-Atomized Aluminum Alloy Powders as Compared to Cast Counterparts
Bryer Sousa,
Worcester Polytechnic Institute


SESSION A22
Fused Filament Fabrication

Session Chair:
Bhanu Chelluri
BAE Systems

173

Germany

10:30 a.m.

Material and Process Development in Powder-Based Fused Filament Fabrication
Sebastian Hein,
Fraunhofer IFAM

387

Portugal

10:55 a.m.

Fused Filament Manufacturing of Graphene-Based Copper Nanocomposites
Francisco Cruz,
University of Coimbra

 

 

11:20 a.m.

No presentation scheduled at this time.


SESSION A23
AM Equipment & Process

Session Chair:
Jing Zhang
Indiana University - Purdue University Indianapolis

095

USA

10:30 a.m.

A Case Study on Control of Atmosphere to Optimize Metal AM By Using Continuous Monitoring and Adjustment of Gases Within the Print Chamber
Ross Cummingham,
Messer North America

435

Canada

10:55 a.m.

Feeding of Water-Atomized Powders in Electron Beam Based AM
Chad Sinclair,
The University of British Columbia

395

Canada

11:20 a.m.

Introduction of New AM Machines Designed for Low-Cost Powder Applications: Optimizing the AM Process
Ralf Edinger,
Canmora Tech Inc.


AMPM2020 TECHNICAL SESSIONS

Monday Afternoon

3:15–4:30 p.m.

 

SESSION A24
Laser AM III: High C Steels

Session Chair:
Robert Gasior
PM Consulting LLC

084

India

3:15 p.m.

Hybrid Material for Printing of Steel Components
Sundar Sriram

069

Canada

3:40 p.m.

Microstructure of H13 Tool Steel Parts Produced by a Laser Powder Bed Fusion Process
Edem Dugbenoo,
McGill University

327

France

4:05 p.m.

Directed Energy Deposition Processing Maps Generation and Influence of Key Process Parameters
Thomas Gilles,
IRT Saint Exupéry


 

SESSION A25
LPBF Steels II

Session Chair:
John Carpenter
Los Alamos National Laboratory

238

USA

3:15 p.m.

Development of Dual-Phase Steel for Laser Powder Bed Fusion Applications
Kerri Horvay,
Hoeganaes Corporation

099

Sweden

3:40 p.m.

Heat Treatment and Properties of Ultra-High-Strength Maraging Steels Fabricated by AM
Faraz Deirmina,
Sandvik Additive Manufacturing

339

Germany

4:05 p.m.

Binder Jetting as a Complementary Technology to Metal Injection Molding for Small Batch Production
Anke Kaletsch,
RWTH Aachen University


 

SESSION A26
AM Powder Modification

Session Chair:
Iver Eric Anderson, FAPMI
Ames Laboratory

371

Canada

3:15 p.m.

Benefits of Rotary Tube Furnaces to Develop and Optimize Powders for PM, AM and Batteries Applications
Yannig Thomas,
National Research Council Canada

283

USA

3:40 p.m.

Accurately Quantifying the Influence of Atomic Layer Deposition on Powder Flowability
John Yin,
Freeman Technology

166

China

4:05 p.m.

Selective Laser Melting of 316L Stainless-Steel Silver Composites for the Application of Bipolar Plates for PEM Fuel Cells
Kaijie Lin,
Nanjing University of Aeronautics and Astronautics