Login   |   Register   

INTERNATIONAL POSTERS dealing with various aspects of PM and particulate materials technologies will be displayed daily starting on Sunday morning. Authors will be available at their posters for discussion Monday (4:30–6:00 p.m.) during the PM Evening Alehouse. Manuscripts submitted from poster authors will be published in the conference proceedings.

“Outstanding Poster” and “Poster of Merit” awards will be given by the Poster Awards Committee for displays that best meet the established criteria. Award ribbons will be posted prior to the designated discussion period on Monday.

Additionally, National Science Foundation, MPIF and CPMT/Axel Madsen student grant recipients' posters will be on display and are listed on the conference app.


Poster Committee

Scott Davis, Chairman
Hoeganaes Corporation

John Blauser
Gasbarre—Precision Tooling

Cynthia Freeby
Ametek Specialty Metal Products

Nicholas T. Mares, FAPMI

Poster A: Materials


154 Poland
Microstructure and Mechanical Properties of Spark Plasma Sintered Alumix 431 Powder Components
Rafal Rubach, Metal Forming Institute

155 Poland
Microstructure and Thermal Conductivity of Spark Plasma Sintered Carbon Nanotube-Based Thermal Protection Systems
Maria Wisniewska, Metal Forming Institute

162 China
Near-Net-Shaped Wear-Resistant Part Fabricated By 3D Gel Printing Haixia Sun, University of Science and Technology Beijing

163 Estonia
Effect of Remelting on Microstructure and Mechanical Properties of Selective Laser Melted Ti-6Al-4V Alloy
Javad Karimi, Tallinn University of Technology

222 China
Yttrium Oxide Dispersion Strengthened Copper Alloy via Internal Oxidation
Pei Li, University of Science and Technology Beijing

273 France
Experimental Study and Discrete Element Modelling of Diamond-Copper Cold Powder Compaction
Damien Sicard, Jr. Laboratoire Interdisciplinaire Carnot de Bourgogne (ICB)/Institut FEMTO-St

299 Canada
Additive Manufacturing of AA2219 Aluminium Components
William Bouchard, Laval University

355 Taiwan
Gas Atomization and Laser Beam Melting of Iron-Based Alloys Powders for Bioabsorbable Implants
Hong-Jen Lai, Industrial Technology Research Institute

424 Canada
Improving The Tribological Properties of Copper-Based PM Metal Matrix Composites for Brake Pad Applications Using Novel Additives
Mohammad Valiei, Laval University

505 USA
Understanding Designer Aluminum Alloys for Powder-Based Additive Manufacturing
Jack Grubbs, Worcester Polytechnic Institute

584 USA
Thermal Stability of Oxide Dispersion Strengthened Nanocrystalline FeNiZr Alloys with Refractory Additions
Blake Fullenwider, US Army Research Lab

Poster B: Processing


046 Pakistan
Potential Preventive Measures to Redeem the Steel Industry: A Needful Dilemma of the Developing Countries
Zain Tariq, Sui Northern Gas Pipeline limited (SNGPL)

168 China
Near-Net-Shaped High-Speed Steel Tool Fabricated by 3D Gel Printing
Zhimeng Guo, University of Science and Technology Beijing

169 China
3D Printing of NdFeB-Bonded Magnets
Fang Yang, University of Science and Technology Beijing

277 USA
Influence of Processing Parameters on Pressure Tightness Efficiency by Vacuum Impregnation of PM Structural Artifacts With Inorganic Sealant
Daniel P. Stauffer, The Pennsylvania State University—Dubois

394 Canada
Laser Profilometry for Process Control in SEBM
William A. Sparling, University of British Columbia

453 Canada
Binder Selection for 3D Printing of Metals
Sergio I. Yanez Sanchez, CREPEC, Department of Chemical Engineering, Polytechnique Montreal

481 USA
Porosity and Surface Defect Analysis of Advanced Powder Metallurgy Ceramics and Alloys Using 3D Visualization
Abbas Fahami, Eurofins Materials Sciences

502 Canada
Predicting Binder and Metal Powder Bed Interactions for Rational Design of Binders in Binder Jetting Additive Manufacturing
David Schlachter, Polytechnique Montréal

124 China
Effect of Fabrication Methods on Densification of Pure Rhenium Plates
Guangda Wang, Advanced Technology & Materials Co., Ltd

Poster C: Properties


187 Russia
Intermetallic Strengthening of Inconel 625 Superalloy Under Direct Energy Deposition
Igor Shishkovsky, Skolkovo Institute of Science and Technology

224 China
Effect of Coarse WC Grain Level on Stainless Steel Cutting Performance of PVD Coated Cemented Carbide Inserts
Bolu Liu, Xiamen Tungsten Co., Ltd. Technology Center

262 Taiwan
Finite Element Modeling of Demagnetization Effect on C-Type Anisotropic Hard Ferrite Magnet
Chih-Liang Chien, Superrite Electronics Co., Ltd

400 Canada
A Solution to Remove the Side Effects of MnS as a Machining Additive
Ebrahim Sharif Sanavi, Université Laval

416 Canada
A New Generation of Machining Aids for PM Steels
Sara Alizadeh, Laval University

443 USA
Purity Evaluation of Metal Powder Feedstocks for Additive Manufacturing
Xinwei Wang, Eurofins Materials Sciences

486 Canada
Influence of Vacuum on Stainless Steel 316L Sintering in Binder Jet Metallic Additive Manufacturing
Alice Goffin, CREPEC, Polytechnique Montreal

583 Canada
Surface Characterization of Additively Manufactured H13 Hot-Work Tool Steel Using Directed Energy Deposition
Owen Craig, Dalhousie University

Three Conferences Sintered Into One Global Event!

WorldPM2020 presents the largest global powder metallurgy (PM) and particulate materials event of the year, and it only happens once every six years in North America. From June 27 through July 1, 2020, join the PM industry in Montreal, Canada, for three co-located conferences underneath one roof!


  • the largest global exhibit on PM, particulate materials, metal additive manufacturing, and tungsten, refractory and hardmaterials equipment, powders, and products;
  • global industry leaders presenting the latest R&D from around the world;
  • networking events and opportunities;
  • and more!
WorldPM2020 Logo

WorldPM2020 Logo

Tungsten2020 Logo

Sponsored by
MPIF and APMI Logos

Metal Powder Industries Federation:

APMI International
105 College Road East
Princeton, NJ 08540 USA

Phone: (609) 452-7700

Email: info@mpif.org

The Metal Powder Industries Federation is a federation of six trade associations representing various aspects of powder metallurgy (PM), metal powders, and particulate materials. Our mission is to advance the interests of the metal powder producing and consuming industries.