Tuesday, June 25
TECHNICAL SESSIONS
POWDERMET TECHNICAL SESSIONS
Tuesday Morning
8:00–9:15 a.m.
- Presentation numbers are listed before the author’s country identification.
- NEW! Encore presentations will be indicated by having an "R" listed after the presentation number.
SESSION 06
Ferrous Materials & Properties III
Session Chairman:
Julie Campbell-Tremblay, PMT,
Rio Tinto Metal Powders
Manufacturing Methods for High-Density Powdered Metal (PM) Applications and Their Effect on Mechanical Properties
Amber Tims, PMT,
North American Höganäs Co.
Optimization of Liquid-Phase Sintering of Boron PM Steels Using Master Alloys
Simon Gelinas,
Université Laval
A Method to Estimate Fatigue Axial Properties for Ferrous Powder Metal Materials
Virgiliu A. Savu,
GKN Sinter Metals
SESSION 07
MIM I
Session Chairman:
Michael Wiseman,
ARC Group Worldwide
Simulation and Experimental Verification of Two Cavity Balance in Injection Molding
Neal S. Myers,
Kennametal, Inc.
5 Reasons to Celebrate Mold Cleaning in Power Injection Molding
Steve Wilson,
Cold Jet LLC
Developments in High-Temperature Nickel Alloys for MIM Applications
Martin A. Kearns,
Sandvik Osprey Limited
SESSION 08
Non-Traditional Alloy Sintering
Session Chairman:
Raymond Serafini, PMT,
Messer LLC
Commercial Sintering of Chromium Powder Metallurgy (PM) Steels
Roland T. Warzel III,
North American Höganäs Co.
Effects of Sintering Conditions on the Diffusion Bonding of AgC-Cu Electrical Contacts
Daudi R. Waryoba,
The Pennsylvania State University
High-Strength Aluminum-Zinc Composite PM Grade with Trace Amount of Copper for Powder Metallurgy Applications
Jessu Joys,
United States Metal Powders, Inc.
POWDERMET TECHNICAL SESSIONS
Tuesday Morning
10:30–11:45 a.m.
SESSION 09
Ferrous Materials and Properties IV
Session Chairman:
Amber Tims, PMT,
North American Höganäs Co.
Advanced Material Options for High-Temperature Sintering
Neal Kraus,
Hoeganaes Corporation
The Effect of Sintering Temperature on the As-Sintered and Heat Treated Properties of Pre-Alloyed Mo Low-Carbon Steel Alloyed with Ferromanganese
Peng Shen,
Stackpole International
Fatigue and Fracture Behavior of Solid- and Liquid-Phase Sintered Fe PM Samples with C, Ni and Cu Additions and Comparisons with Fatigue and Fracture Behavior of AM Coupons
Daudi R. Waryoba,
The Pennsylvania State University
SESSION 10
MIM II
Session Chairman:
Stefan Joens,
Elnik Systems, LLC
Combining Good Corrosion resistance and Mechanical Properties
William Thorne,
BASF
The Effects of Sintering Temperature on the Microstructural Evolution of 718
Rees Jones,
ARC Group Worldwide
Optimizing Extrusion Process Using Water Atomized 17-4 Stainless Steel Powders
Jian Zhang,
Indiana University—Purdue University Indianapolis (IUPUI)
SESSION 11
Modeling I
Session Chairman:
Beth Hinchliffe,
Catalus Corporation
Numerical Simulation of Close-Coupled Gas Atomization: Impact of Geometric and Fluid Parameters
Franz Hernandez,
Ames Laboratory (USDOE)
Powder Flow in Additive Manufacturing—Challenges and Opportunities
Andres D. Orlando,
Jenike & Johanson, Inc.
Importance of Particle-Size Distribution and Thermal Stress Factors—A Theoretical Approach to Predict Defects in AM Parts
Arun K. Chattopadhyay,
Uniformity Labs
POWDERMET TECHNICAL SESSIONS
Tuesday Afternoon
3:15–4:30 p.m.
SESSION 12
Advanced Particulate Materials
Session Chairman:
Bo Hu,
North American Höganäs Co.
Investigation of Powder Processing, Heat Treating, and Texturing to Improve Gas-Atomized Alnico Magnets for Use in Electric Drive Motors
Emily A. Rinko,
Iowa State University
Multistage Foaming of Powder Particles for Structural and Functional Applications
Samuel Brennan,
Millersville Univeristy
Results of Experiments with Cold Spray Deposition of Fe-Based ODS Alloys Using As-Atomized Spherical GARS Powder
Rebecca Whitesell,
Iowa State University
SESSION 13
Novel Sintering
Session Chairman:
Robert Dowding,
U.S. Army Research Laboratory
Microgravity Liquid-Phase Sintering
Randall M. German, FAPMI,
German Materials Technology
Spark Plasma Sintering of Tungsten and Lanthanated Tungsten
John L. Johnson, FAPMI,
Elmet Technologies LLC
Manipulating Bimodal Grain-Size Distribution to Enhance Material Properties in a Spark Plasma Sintered Nanostructured FeNiZr Alloy
Sean Fudger,
U.S. Army Research Laboratory
SESSION 14
Modeling II
Session Chairman:
George Coppens,
Means Industries
The Analysis of the Densification Curve of Metallic Powders in Uniaxial Cold Compaction
Alberto Molinari, APMI,
University of Trento
A Design Procedure to Define the Optimum Hardness of Parts Subject to Contact Stresses
Alberto Molinari, FAPMI,
University of Trento
Computational Modeling of Thermophysical Properties of Silica Reinforced Porous Anodized aluminum (SiRPA) based Thermal Swing Coating
Abhilash Gulhane,
Indiana University—Purdue University Indianapolis (IUPUI)