Monday, August 30
|
| Session 1: 8:00–10:00 a.m. |
| 8:00 a.m. |
Keynote Presentation: Titanium Laser Powder Bed Additive Manufacturing Development at Boeing
Jim Dobbs, Boeing
USA
|
|
8:30 a.m.
|
Landing Gear Component Manufacturing via Laser Powder Bed Fusion
Andrew LaTour, MolyWorks Materials Corp.
USA
|
|
8:45 a.m.
|
Additive Manufactured Ti-Ta Alloys for Biomedical Applications
Erin Brodie, Monash University
Australia
|
|
9:00 a.m.
|
Elevated Temperature Corrosion Resistance of Additive Manufactured Single-Phase HEAs Involving Titanium
Michael Free, University of Utah
USA
|
|
9:15 a.m.
|
No presentation at this time.
|
|
9:30 a.m.
|
Keynote Presentation: Titanium Sintering - From Atomic Motion to Production Cycles
Randall German, FAPMI, San Diego State University
United States
|
| Session 1 Session 2 Session 3 Session 4 Session 5 Session 6 Session 7
Go to top
|
| Session 2: 10:30 a.m.–Noon **concurrent track |
|
10:30 a.m.
|
Additive Manufacturing & Design of Binder-Assisted Additive Manufacturing
Azim Gokce, University of Louisville, Invited Speaker
USA
|
|
10:45 a.m.
|
3D Printing of Titanium Parts from Titanium Hydride Powder
Efraín Carreño-Morelli, University of Applied Sciences and Arts Western Switzerland
Switzerland
|
|
11:00 a.m.
|
Cold Spray of Titanium Alloys for Component Repair and Rapid Additive Manufacturing
Colin McCracken, Oerlikon Metco
Canada
|
|
11:15 a.m.
|
Low-Cost Titanium Part Manufacturing by Cold Spray Additive
Leon Prentice, CSIRO
Australia
|
|
11:30 a.m.
|
Debinding and Sintering Equipment for Processing PM Titanium
Mattias Scharvogel, Titanium Generation GmbH
Germany
|
| Session 1 Session 2 Session 3 Session 4 Session 5 Session 6 Session 7
Go to top
|
| Session 3: 10:30 a.m.–Noon **concurrent track |
|
10:30 a.m.
|
Lightweight Automotive Applications for Powder Metallurgy
Ian Donaldson, FAPMI, GKN Sinter Metals, Invited Speaker
USA
|
|
10:45 a.m.
|
Commercialization of PM Titanium
Joe Grohowski, Praxis Technology
USA
|
|
11:00 a.m.
|
Microstructural Development of Ti-13Nb-13Zr Sintered from Hydrided Powders
Vinicius Henriques, IAE
Brazil
|
|
11:15 a.m.
|
Mechanism of the Reduction Step in the Production of Ti Powder by the HAMR Process
Hyrum Lefler, Carpenter Technology Corporation
USA
|
|
11:30 a.m.
|
Microstructural Development of Titanium Alloy TNTZ Produced by Powder Metallurgy Technique
Raíssa Pereira, Aerospace Institute of Technology
Brazil
|
| Session 1 Session 2 Session 3 Session 4 Session 5 Session 6 Session 7
Go to top
|
| Session 4: 1:30–3:15 p.m. **concurrent track |
|
1:30 p.m.
|
The Effect of Different HIP Treatments on the Microstructure and Material Properties of PBF Ti-6Al-4V
Magnus Ahlfors, Quintus Technologies LLC, Invited Speaker
USA
|
|
1:45 p.m.
|
No presentation at this time.
|
|
2:00 p.m.
|
Fatigue Behavior of Ti-6Al-4V Processed by Additive Manufacturing – From Bulk Material to Lattice Structures
Thomas Niendorf, University of Kassel, Invited Speaker
Germany
|
|
2:15 p.m.
|
Effect of Nano-Yttria Stabilized Zirconia Addition on the Microstructure and Mechanical Properties of Ti-6Al-4V Parts Manufactured by Selective Laser Melting
Jean-Jacques Fouchet, Z3DLAB SAS
France
|
|
2:30 p.m.
|
Reduction of the Oxygen Impact on the Mechanical Properties of Laser Cladded Titanium Alloys by a Dual-Shield Gas Strategy
Jona Engel, ETH Zurich
Switzerland
|
|
2:45 p.m.
|
Characterization of Microstructure and Mechanical Properties of Ti-6Al-2Sn-4Zr-2Mo Fabricated through Laser Powder Bed Fusion
Chao Xu, McGill University
Canada
|
|
3:00 p.m.
|
Influence of Process Route on Mechanical Properties and Fatigue Life for Ti6Al4V Grade 23 – A Comparison Between Additive Manufacturing and Conventional Manufacturing
Peter Harlin, Sandvik Additive Manufacturing
Sweden
|
| Session 1 Session 2 Session 3 Session 4 Session 5 Session 6 Session 7
Go to top
|
| Session 5: 1:30–3:15 p.m. **concurrent track |
|
1:30 p.m.
|
Atomization of High-Strength Titanium Alloys
George Bernhard, Hoeganaes Specialty Metal Powders
USA
|
|
1:45 p.m.
|
Hydrogen-Assisted Magnesiothermic Reduction (HAMR) of TiO2 for Making Ti Powder
Pei Sun, University of Utah, Invited Speaker
USA
|
|
2:00 p.m.
|
A Review on Deoxygenation of Ti
Ying Zhang, Institute of Process Engineering, Chinese Academy of Sciences, Invited Speaker
China
|
|
2:15 p.m.
|
Humidity Adsorption and Its Impact on Titanium Powder Properties
Louis-Philippe Lefebvre, National Research Council Canada
Canada
|
|
2:30 p.m.
|
No presentation at this time.
|
|
2:45 P.M.
|
Titanium Alloy Powder Metals’ Impact on the Titanium Industry
Art Kracke, AAK Consulting LLC
USA
|
|
3:00 p.m.
|
Melt-Free Continuous Titanium Alloy Powder: Production Facility and Development Center
Art Kracke, AAK Consulting LLC
USA
|
| Session 1 Session 2 Session 3 Session 4 Session 5 Session 6 Session 7
Go to top
|
| Session 6: 3:45–5:15 p.m. **concurrent track |
|
3:45 p.m.
|
Improving the Printability of Ti-6Al-4V: Technical and Cost Aspects of Atomized Ti Powder
Eric Bono, Carpenter Technology Corp., Invited Speaker
USA
|
|
4:00 p.m.
|
Influence of Ti-6Al-4V Powder Feed Stock on the Quality of Selective Laser Melted Additive Manufacturing Parts
Joe Elambasseril, RMIT University
Australia
|
|
4:15 p.m.
|
A Novel Pathway Towards Cost-Effective Ti Powders for Additive Manufacturing and Metal Injection Molding
Gang Chen, USTB
China
|
|
4:30 p.m.
|
Plasma Production of Ti64 Powders for AM
Jerome Pollak, Tekna, Invited Speaker
Canada
|
|
4:45 p.m.
|
Evaluation of Powder Aging Effects on AM Process and Properties of Titanium Ti-6Al-4V ELI
Katri Kakko, Electro Optical Systems Finland Oy
Finland
|
|
5:00 p.m.
|
Effect of Powder Reuse on the Mechanical Properties of Selective Laser Melted Titanium
Fernando Alamos, University of Notre Dame
USA
|
| Session 1 Session 2 Session 3 Session 4 Session 5 Session 6 Session 7
Go to top
|
| Session 7: 3:45–5:15 p.m. **concurrent track |
|
3:45 p.m.
|
Titanium Hydride Approach in Powder Metallurgy of Aerospace and Medical Beta Alloys
Orest Ivasishin, International Center of Future Science, Jilin University, Invited Speaker
China
|
|
4:00 p.m.
|
Cost-Affordable Ti: Thermomechanical Powder Processing of Low-Cost Compositions
Leandro Bolzoni, The University of Waikato, Invited Speaker
New Zealand
|
|
4:15 p.m.
|
Thermo-Mechanical Processing Characterization of Powder Metallurgy Titanium Alloys
Austin Mann, Boeing
USA
|
|
4:30 p.m.
|
Novel Sintering Process for Titanium Powder with Simultaneous Deoxidation Using Yttrium
Takanari Ouchi, The University of Tokyo
Japan
|
|
4:45 p.m.
|
Constructing Hierarchical Microstructure with Nano-Reinforcement for Superhigh Creep Resistance
Lu-Jun Huang, Harbin Institute of Technology
China
|
|
5:00 p.m.
|
Using Hydrogen-Induced Lattice Expansion to Densify Powder Metallurgy Titanium Alloys
Chengshang Zhou, Central South University
China
|
| Session 1 Session 2 Session 3 Session 4 Session 5 Session 6 Session 7
Go to top
|