Part 1 -
Advanced Materials
State of the North American P/M
Industry – 2002
Donald G. White
Development of High
Performance Superconductors
via Powder Metallurgy
Steven A. Miller, Nadder
Pourrahimi & Shahin Pourrahimi
Self-Lubrication Coating and Surface
Modification
Atsuhi Mitsuo, Thananan Akhadejdamrong and Tatsuhiko Aizawa
Nanoparticle Technology for Chemical Overdose
Treatment
Richard E. Partch, Evon Powell, & Young H. Lee
Influence of W/O Content on DC-Conductivity of
AG-Nanopowders
Bernd H. Güenther, Jens Mehlich
and Mehmet Türker
Isostatic Pressing Technology
Franz X. Zimmerman, & Jerry
Toops
Hot Isostatic Pressing (HIP) Model
Developments for P/M Alloy 690N2
James W. Sears & Junde Xu
Advanced Isostatic P/M Processing: Beyond the
Fully Dense Billet
Stephen J. Mashl, Daniel H. Zick & John C. Hebeisen
Metal Foam Panels for
Industrial Use
Thomas Trendelenburg, Eric
Wolfsgruber & Frantisek Simancik
Alloy Development
for Hot Gas Filters
Robert L. Terpstra, Iver E. Anderson & Brian Gleeson
Simple Powder
Metallurgy Processing of Al-8Fe-4Ce Alloys
James C. Foley, Warren H. Hunt, Jr., Daniel J. Barnard, & Francis C. Laabs
Mg2Si/Mg Composite Material via
Solid-State Synthesis Processing
Katsuyoshi Kondoh & Tatsuhiko
Aizawa
Nanoparticle
Synthesis via NanomiserÔ
Device Atmospheric Pressure Flame
Radenka Maric, Seth Sundell,
Miodrag Oljaca & Andrew Hunt
Direct Fabrication of Nano-Structured Particulate
Materials via
Bulk Mechanical Alloying
Tatsuhiko Aizawa, Ritsuko Tsuzuki and Katsuyoshi Kondoh
The Use of X-Ray Imaging and Temperature
Measurements to
Monitor the Self Propagating High Temperature Synthesis (SHS)
Reaction and Densification of Molybdenum Disilicide – Silicon Carbide
Compposites during Electronconsolidation
Ň
Brian D. Merkle, W.M. Goldberger, Joshua M. Borton, Angel Garcia,
Frank A. Bruce & Rama Nageswaran
Ignition Phenomena in
SHS - A New Experimental Methodology
Noemi Bertolino, Marzio Monagheddu, A. Tacca, Piero Giuliani,
Claudio Zanotti & U. Anselmi Tamburini
SHS Synthesis of FGM
for Thermal Barrier Applications
N. Bertolino Noemi, Marzio
Monagheddu, A. Tacca, P. Giuliani,
C. Zanotti & U. Anselmi Tamburini
Review of Applications and Materials Processed
by Rotating
Horizontal High Energy Mill
Animesh Bose, Kei Ameyama, Sebastian delaTorre, David Vigueras,
Deepak Madan, T.S. Wei, P. Hightower, and H. Zoz
Powder Characterization of Al-Cu Produced by Mechanical Alloying
Joano Fogagnolo, Diego Amador,
Francisco Morales,
Elisa Ruiz-Navas & Jose Torralba
Synthesis and Mechanical Properties of In-Situ ODS FeAl Alloys Prepared by
Mechanical Alloying
Kazuo Isonishi, Mutsuya Hashii, Akihiko Hirano, & Tetsuya Sawayama
Preparation of Mo5-xCoxSi3 Materials by
Mechanical Milling and Hot Pressing
Danqing Yi, Yu Cao & Lars Nyborg
Production
of Alloys of Ag-Sn-Cu System by Mechanical Alloying
Henriqu A. Ishii & Francisco Ambrozio Filho
Part 2 -
Automotive
Optimization of Dynamic Properties of Gears
Heron A. Rodrigues, Masazumi
Hanada, Michael Folliard,
Kazuhiko Suganaga, & Earl Kiser
Aluminum P/M Parts: Optimization of Mechanical
Properties and
Dimensional Accuracy
Antonio Romero & Anna Larsson
Diffusion Bonded Molybdenum Steel Powders for High Strength Application
Guido Olschewski & Gregor Nitsch
Tough P/M Materials
for Automotive Applications
Akira Fujiki
Ferrous Powder for Dynamically Loaded,
Highly-Stressed Components
In the Emerging High Performance Automotive Field
Mark R. Haas
Performance and Properties of Surface
Densified P/M Transmission Gear
Linnea Fordén, Sven Bengtsson & Claes Kuylenstierna
Design Optimisation of the P/M Camshaft
Pulley: Conception, Verification and Validation
E. Ayax, G. Laurent, L.Vinai, Pierre Blanchard and O. Giraud
Recent Developments
in P/M Variable Valve-Timing Systems for Automobiles
Heinrich Wiedemann, Patrice Delarbre, Bernd Engelmann,
Michael Krehl & Lorenz S. Sigl
Valve Seat Inserts Material with Good
Machinability
Hideaki Kawata & Koichiro
Hayashi
P/M High-Speed Steel Application in Automotive
Components - Valve Seat Inserts
Jesualdo L. Rossi, Lucio Salgado, Jesus Filho,
Edson S. Edilson R. Jesus, Ambrozio Filho
Jose C. Santos
Development of a Sintered Bearing with Inner
Grooves
Hidekazu Tokushima, Motohiro Miyasaka & Katsutoshi Nii
Development of a Rotor Core of Motor for a
Hybrid-car by Means of
Sinter Diffusion Bonding
Kazuo Asaka, Tomoaki Arakawa, & Toshiyasu Komatsu
New Reinforcement for Aluminum Matrix Composites
William C. Harrigan, Jr.
Processing of
Controlled Porosity Titanium-Based Materials
Don M. Kupp, Dennis Claar & Kati Flemmig
Novel Techniques
for the Fabrication of Titanium Aluminide Thermal
Protection Systems (TPS) for Aerospace Applications
Don M. Kupp, T. Dennis Claar, K. Flemmig, U. Waag and H. Göehler
Surface Modification of Refined Aluminium Alloys by Plasma Nitriding
Patama Visuttipitukul, Tatsuhiko Aizawa & Hideyuki Kuwahara
Part 3 – Particulate
Production & Binders
Efficient P/M Parts
Production Through Bonded Mixes Having
Unique Powder Properties
Hilmar Vidarsson, Jeanette Lewenhagen and Björn Johansson
Test
Device and Method for Evaluation of Lubricants for P/M Compaction
Gerald A. Gegel, Sydney Luk
Experimental Studies of Lubricant Distribution at the Surface of Parts
of Homogenous Mixes of Iron Powder and Lubricant
Erik Hjortsberg, Lars Nyborg, , Hilmar Vidarsson, and Anna Ahlqvist
Characteristics of High Density P/M Parts Produced by Die Wall Lubrication
Method
Shigeyuki Saito, Yoshimi Sugaya, Makoto Iwakiri & Thuyosyi Kagaya
Combining Electrostatic
Die Wall Lubrication and Warm
Compaction to Enhance Green and Sintered Properties of P/M Components
Patrick Lemieux,Y. Thomas, Paul-Emile Mongeon,
Sylvain Pelletier & Sylvain St-Laurent
High Density
Powder Compaction Using Die Wall Lubrication
Mikio Kondoh & Hiroshi Okajima
Inter-Process and Plant Solids Handling, Formulation and
Processing of 'Toxic' Metal Powders
Hans Pettersson
Gas Atomization of Fine Aluminum Alloy
Mat Husin Saleh, Fauzi Ismail, & Norhamidi Muhamad
An Experimental Study of Water Atomization of Aluminum Alloys
Oleg D. Neikov, Alexander V. Krajnikov, Galina I. Vasilieva,
& Natalya G. Chaykina
Gas Atomization of
Sn-Pb Solder Alloys: The Influence of
Composition on Morphology
Joseph T. Strauss and Gerard Reverri
Preparation of
Monosized Particles of Metals and Alloys by POEM Process
Akira Kawasaki & Ryuzo Watanabe
Control of "Satellite" Particles in Gas Atomisation
John
J. Dunkley & Brett Telford
Impulse
Atomization: Current Development and Opportunities
Hani Henein
Process
Optimization and Atomization Mechanism of Hybrid Atomization
Yunzhong Liu, Kazumi Minagawa, Hideki Kakisawa & Kohmei Halada
Instability
Processes in Melt Atomization
Jens
Stefen Markus, Udo Fritsching
Progress in
Experimental Analysis of Gas Atomization Process Physics
Iver
E. Anderson, Richard S. Figliola, R.L. Terpstra,
Sebastian Rau and Boris Rauscher
Hot Gas Atomization
Gerhard Wolf, Konrad Till & Rainer Scholz
An Alternate View of Close-Coupled Gas Atomization of Liquid Metals
Steven P. Mates, Frank S. Biancaniello and Stephen D. Ridder
Measurement and Control
of Metal Flow-Rate in a Gas-Metal Atomizer
Stephen D. Ridder
Suitability of
Powder Processed High Nitrogen Stainless Steel Alloys
for High Performance Applications
Frank S. Biancaniello, Rodney D. Jiggetts, Mark R. Stoudt,
Richard E. Ricker & Stephen D. Ridder
Advantages of Low Pressure Water Atomization of Metal Powders
Gunther Schulz
Extrusion Behavior of
Rapidly Solidified Al88.7Ni7.9Mm3.4 Alloy with Powder Size
Soon-Jik Hong, Hyeon-Taek Son & Byong-Sun Chun
Microstructure And Thermoelectric Properties Of N-Type 95% Bi2 Te3-
5% Bi2se3 Alloy
Produced by Rapid Solidification and Hot Extrusion
Hyeon-Taek Son, Soon-Jik Hong & Byong-Sun Chun
Rapid Solidified
Materials Made By Wideflow Melt Film Gas Atomization
Gunther Schulz
Improvement of Electrochemical Properties of AB5-Type Hydrogen
Storage Powder by N2 Gas Atomization
Katsu Yanagimoto, Daisuke Kimura & Toshiyuki Sawada
Production
of Spherical Titanium Powder by Plasma Atomization
Mark E. Smagorinski & P.G. Tsantrizos
Part 4 -
Compaction,
Forming & Die Filling
Deformation States of Dies for Powder
Compaction: Comparison
Between Analytical and FEM Calculations
Enrico Armentani, Filippo G. Bocchini, Gabriele Cricri,
& Renato Esposito
Impact of Tooling Design and Set-up on the Variability of
Production P/M Components
Matthew C. Frank, Irene J. Petrick, Amine Lehtihet & Robert C. Voight
The Behavior During
Compaction Of A Composite Mixture Of A High
Compressible Powder And A High-Alloyed Iron Powder
Maurício D.M. das Neves, Francisco Ambrosio Filho & Renato Panelli
New Hydraulic CNC
Press System for the Production of Hardmetal Insert
Type Parts with Maximum Precision and Minimum Set-up Time
Gerhard Moser & Jack Krajcirik
Combustion Driven Compaction
David L. Kruczynski, John
M. Ryan, Donald S. Trostle,
Douglas F. Witherspoon & Dennis W. Massey
New Extrusion Process with Kinematic-Force Intensification
of Contact and Volume Deformations of Powder Materials
Vadim L. Berezhnoy
Friction Assisted Techinique for P/M Extrusion
Traian T. Canta, Dan Sabadus, Dan Frunza, and Vasile Iancu
Microclean P/M Tool Steels and High Speed Steels of the Third Generation
Heinz Makovec & Roland Rabitsch
High Density P/M Components by High Velocity Compaction
Paul Skoglund, Mikael Kejzelman & Ingrid Hauer
High Velocity Compaction
Pierre Doremus, Florent Duwa, P. François, G. Puente & C.H. Allibert
High Velocity
Compaction of Metal Powders,
A Study on Density and Properties
Anders Skagerstrand
Material
Properties and Process Robustness Obtained with Warm
Compaction of Improved Densmixä Powders
U. Engström,Björn Johansson, Per Knutsson & Hilmar Vidarsson
Material
Properties of Heat-Treated Double Pressed/ Sintered P/M
Steels in Comparison to Warm Compacted/Sinter Hardened Materials
Dave Milligan, Alain Marcotte, Jim Lingenfelter & Björn Johansson
High Performance
P/M Materials Using the Warm Compaction Process
Hironori Suzuki, Yoshikazu Seki & Kazuhisa Fujisawa
Near Net Shape Processing by Vacuum Plasma Spray Forming
Arvind Agarwal & Christopher A. Power
Direct Metal Laser
Sintering in 20 µm Layer Thickness
Juha Kotila, Tatu Syvanen, Jouni Hanninen, Jan-Erik Lind & Olli Nyrhila
Material Issues for Direct Rapid Prototyping Utilizing
the Blown Powder Process
Ivica Smid, M. Resch and G. Pintsuk
Production of Tool Steels Using the Spray Forming Technology
Claus Spiegelhauer & Odd Sandberg
Effect of Particle Injection During Spray Forming of Cu-Sn-Billets
Volker Uhlenwinkel, Alexander Schneider, Thomas Wriedt,
Helmuth Harig & Klaus Bauckhage
Production of Homogeneous Bearing Steel Billet by Spray Forming
Chengsong Cui, Olaf Meyer, Heike Zöller, Udo Fritsching,
Alwin Schulz, Klaus Bauckhage & Peter Mayr
The Effect of Two
Way Thermal Coupling on
Sprays in Atomization and Spray Deposition of a Cu-6Sn Alloy
Hani Henein & Volker Uhlenwinkel
Wear Resistant Cold Work Tool Steels Made by Spray Forming
Odd
Sandberg & Lennart Jönson
Study and Improvement of Die Filling Systems for Reducing Density Variations
Michel Guillot, Martin
Pesant, Hedi Chtourou, David Boies and Pierre Carrier
Improvement of Die
Filling by " Agitating Shoe"
Yasuhiro Hashimoto, Masahiro Murakami & Yoshikazu Seki
Experimental and
Numerical Investigations of Die Filling and Powder Transfer
Chuan-Yu Wu, Alan C.F. Cocks, and Olivier T. Gillia
Warm Flow Compaction for High Complexity P/M Parts
Georg Veltl & Frank Petzoldt
Application of
Fluidization for Powder Delivery and Die Filling
Tony F. Zahrah, Rod Rowland & George Gasbarre Jr
Part 5 - Fatigue
Fatigue Design Concepts for P/M
Parts and
Required Material Data – An Overview
Cetin Morris
Sonsino
Design for Rolling Contact Fatigue
Klaus Lipp & Gottfried Hoffman
The Rolling Contact Fatigue Properties of P/M Steel Alloys
Howard I. Sanderow & Doug McPherson
High Fatigue
Properties on PM Steels: Considerations About Density,
Composition and Processing Conditions
Pierre Blanchard & S. Roure
Fatigue and Durability of Powder Metallurgy
Particle Reinforced Aluminum (PMPRA)
Nik
Chawla
Fatigue Crack
Initiation in P/M Steel
Anders Bergmark, Luigi Alzati & Ulrika Persson
Effect of Copper and Nickel Alloying Additions on the
Tensile and
Fatigue Behavior of Sintered Steels
Nik Chawla, D.
Babic, J.J. Williams, S.J. Polasik,
M. Marucci and K.S. Narasimhan
Structural
Durability of Warm Compacted - Single Pressed Synchronizer Hubs
in Comparison to Conventionally Double Pressed Double Sintered Parts
Cetin Morris Sonsino, Klaus Lipp, Raimund Ratzi, Ulf Engström,
Dominique Rezel, Vincent Berier, Giulio Ronchiato & Tommaso Giunti
Dynamic Properties of Sintered
Molybdenum Steels
Sylvain St-Laurent
& Francois Chagnon
Effect of
Microstructural Inhomogeneities on the Fatigue Crack
Growth Response of a Prealloyed and Two Hybrid P/M Steels
Suleyman Saritas, Robert Causton, Brian James & Alan Lawley
Effect of Ni Powder Morphology on the
Fatigue Properties of P/M Ni Steels
Thomas F. Stephenson, Taj P. Singh, Steven S. Sun & Zhirui Wang
Influence
of Density on the Rolling Contact Fatigue of Distaloy HP-1
Jens
Petersen & Paul Beiss
RCF-testing of Selectively Densified Rollers of P/M
Materials for Gear Applications
Pernilla Johansson, Sven Bengtsson & Senad Dizdar
Part 6 -
Hard Metals/Refractory Metals/Composites
Development of New Types of Carbides with Ultrafine and Even
Finer
Tungsten Carbide Powders
Konrad Friedrichs & Klaus P. Moerti
Effect of Heat
Treatment on Properties of Double
Cemented Carbide Composite
Xin Deng, B.R. Patterson, M.C. Koopman, K.K. Chawla, M.M. Estrada,
Zhigang Fang, Greg Lockwood, Anthony Griffo& J. Bitler
Infrared Thermal Processing of Hardmetals
Terry Tiegs & Craig Blue
Crack Growth Resistance of Alumina Tool Ceramics
Magdalena Szutkowska & Marek Boniecki
Superhard and
Tough Composite Material for Synthetic
Diamond Tool Matrix
Radu L. Orban, Victor Constantinescu and Şerban Domşa
Sintered Structural Steels Microalloyed with Niobium and Titanium
Magdalena Orban
Effect of Process Variables on Isopress/Sinter
Densification of Molybdenum Powders
John F. Bingert, Sherri R. Bingert & Eralio J. Trujillo
Embrittlement
Mechanism of Activation Sintered Molybdenum
Hung-Shang Huang & Kuen-Shyang Hwang
Consolidation and
Characterization of Hard Metals Made of Tough
Coated Hard Particles (TCHPs)
Ivica Smid, Richard E. Toth, Peter Ettmayer, G. Kladler, E. Kny & H. Hereth
Micro-Engineered Wear Coating by CVD Coated Powders
Asit
Biswas, Dean Baker, Andrew J. Sherman, Gregory W. Smith & M.B. Beardsley
Braze and Carbide Interactions
Ravi K. Enneti, Neal Myers and Randall M. German
The Effect of Graphite on the Processing and
Properties of Copper-Graphite Composites
Hyungsik Chung, Tae-Hyoung Kim, Sang-Chul Kim, Jun-Dong Lee,
Dong-Jun Hwang, Jae-Hwan Ahn and Yong-Jin Kim
Development of
Aluminum-Silicon-Magnesium Alloys
Reinforced with Ceramic Particles
Noemí Martínez, Vicente Amigó, MaDolores Salvador, David
Busquets-Mataix
Composite Friction Material for Brake Applications
Dan Augustin Pernes, Victor Romulus Constantinescu,
Radu Liviu Orban, Lidia Adriana Sorcoi, & Maricel Leonte
Damping Properties and Microstructures of TiNi
Embedded Al Composites
Sang Jim Lee, In Shup Ahn, Kyu Hwan Lee
A Thermodynamic Approach to the Processing of the
In-Situ Particulate Reinforced Metal/Intermetallic
Matrix Composites
Radu
Orban
Processing and
Tribological Properties of
Chromium Carbide Based Cermets
Irina V. Hussainova, Juri Pirso & Mart Viljus
Microstructures and
Mechanical Properties of TiC-30vol%Ni3Al
Cermets Added Boron
Ji Heon Kim & Wan Jae Lee
The Structure and
Properties Forming in Boron
Carbide/Aluminum Composite During Processing
Lembit Kommel, Irina Hussainova & Eduard Kimmari
Ball-Milling and
Sintering of Blends of Tungsten
and Yttrium-Rich Powders
Roland A. Talillard, Marie-Noëlle
Avettand-Fčnoel, Jean Dhers & Jacques Foct
Part 7 – Materials
Effects
of Thermal Exposure on The Mechanical Properties of
Aluminum P/M Alloy AC2014
Paul D. Bishop, Kevin R. Couchman and T.E. Geiman.
Properties of
Rapidly Solidified Powder Aluminum Alloys for Elevated
Temperatures Produced by Water Atomization
Oleg D. Neikov, Yuliy V.Milman, Daniel B.Miracle, Dina V.Lotsko,
Alexander I.Sirko, Anotoliy V.Sameljuk, Nikolay A.Yefimov
The Effects of
Copper Oxides on the Properties of Particulate
and Wrought Coppers
Harold E. Kelley, Fred Geisser & Pierre W. Taubenblat
Sintering of 90/10 Bronzes: Influence of the Process
Parameters on Dimensional Behaviour
Cinzia Menapace, Alberto Molinari, and P. Costa
Microstructure and
Mechanical Properties of Al Sintered
Compacts Consolidated by Pulse Current Pressure Sintering Process
Takekazu Nagae, Shogo Tomida, Takashi Kamiya, Masaru Yokota,
Masateru Nose and Shigeoki Saji
Forming of Copper Alloy Composite Layer on
Aluminum Alloy by Pulse Current Pressure Sintering Process
Takekazu Nage, Masaru Yokota, Shogo Tomida, Akira Okada and Naoyuki Inada
Explosion-Security
of Manufacture Processes of Advanced Water
Atomized Aluminum
Alloy P/M Technology
Oleg D. Neikov, Alexander V. Krajnikov, Vladimir I. Panasenko,
Anatoliy V. Sameljuk, Valeriy G. Tokhtuyev and Galina I. Vasilieva
Mechanical
Properties of Al2O3/Cu Nanocomposite with
Variation of Cu Contents
Young Do Kim, Se Jin Ko, Kyoung Ho Min and In-Hyung Moon
Bioactive Surface
Modification by Plasma Spray Coating Process
Kyu-Hwan Lee, Baek-Hee Lee & Young Do Kim
Effect of Tungsten Particle Size on Electrical Properties of Liquid
Phase Sintered W-Cu Composites
Sang-Woo Park, Soon-Wook Kim & In-Hyung Moon
On the Intergranular Corrosion of P/M 316L Stainless Steels
Prasan K. Samal & Joseph B. Terrell
Mechanical
Characteristics and Corrosion Resistance
Properties of Different P/M Duplex Stainless Steels Compositions
Mario Rosso, Marco Actis Grande Davide Ornato & P. Aguiari
Corrosion Fatigue
of the P/M Steels AISI 316L and HCx Under
Artificial Seawater Environment
Cetin Morris Sonsino, Rainer Zieschang, Bettina Hofmann,
Alberto Molinari, Karl-Hans Sandritter & Mars Persson
High Density Sintered Stainless Steel with Close Tolerances
Ricardo Canto Leyton & Olof Andersson
Effects of Chemistry Variations on Dimensional Control of 316L Stainless
Steel
Neal S. Myers, Ravi K. Enneti, Lou Campbell and Randall M. German
Oxidation Behavior
of Sintered 316L, 434L and Duplex Stainless Steels
Asunción Bautista, Francisco Velasco, Mónica Campos, M. Eugenia Rabanal,
Juana Abenojar and José M. Torralba
P/M Tool Steels and High Speed Steels with High
Cleanliness and Uniformity Using Latest Processing Technologies
Claes Tornberg & Andreas Fölzer
Characterization
of P/M HSS with Tailored Hardness
Obtained by Two Different Processes
V. Trabadelo, C. Zubizarreta, S. Giménez, I. Iturriza and F. Castro
Fabrication of Nanostructural W-Cu Powder Using W-CuO Mixture
Dae-Gun
Kim, Kang Won Lee & Young Do Kim
Sintering Behavior
of a Composite W-Cu Powder
Produced by High Energy Milling
Uilame Umbelino Gomes, Franciné Alves da Costa, Francisco Ambrozio Filho,
and Angelus Giuseppe Pereira da Silva
Fabrication of W-10Cu Alloy with
High Thermal Conductivity
Seong-Hyeon Hong,
Tae-Heyong Kim & Byoung-Kee Kim
Mechanical and
Acoustical Properties of Highly Porous Materials
Based on Metal Hollow Spheres
Ulf Waag, Günter Stephani, Frank Bretschneider and Helmut Venghaus
Syntactic Metal Composite Foams: Fabrication and Properties
Andrew J. Sherman & Asit
Biswas
New Methods to
Produce Foam Metal Using Hydro-Gel Binder
Toru Shimizu & Akiko Kitajima
Part 8 - Material Properties
Properties
Obtained by Chromium-Containing Material
Sigurd Berg & Barbara Maroli
Sinterability and
Properties of Cr-Mo Prealloyed
Low Alloy Steels Astaloy CrM®
Monica Campos & José Torralba
Properties of High
Strength P/M Materials Obtained by Different
Compaction Methods in Combination with High Temperature Sintering
Ingrid Hauer, Mats Larsson, & Ulf Engstrom
Effect of Density
and Mix Formulation on Sintered
Strength and Dimensional Stability of 0.85% Mo Low Alloy Steel Powders
Claude Gélinas & Sylvain St-Laurent
Effect of Small
Additions of Boron on the Mechanical
Properties and Hardenability of P/M Steels
Michael Marucci, Alan Lawley, Robert Causton, & Suleyman Saritas
Wear Phenomena in Composite Materials
Copper-Graphite
Under Current Intensity
Natividad Antón, Jose M. García-Marquez,
Joan A. Bas, Jose A. Calero & Jose Torralba
Wear Behaviour of
Sintered Ferrous Alloys
Mohammed Hamiuddin
Effect of
Composition, Microstructure and Service Conditions on
Tribological Performance of Cermets
Irina V. Hussainova
Wear Behavior of
Ceramic Particles Reinforced Aluminum
Matrix Composites
Noemi Martinez, Vincente Amigo, MaDolores Salvador,
David Busquets-Mataix & Carlos Ferrer
A New Nickel Powder for
Use in P/M Iron-Nickels and Nickel Steels
Daniel F. Carroll, Prasan K. Samal, Janne Marjelund
Effects of Elemental Cr Addition on Sintering and Mechanical
Properties of Cu-Sn Alloy Compacts
Kazuo Kato, Shinji Yamada & Michihiro Tagami
Influence of the
Dispersion of La2O3 and LaCrO3 on
High-Temperature Oxidation of P/M Fe-Cr Alloys
Zenzo Ishijima & Hideo Shikata
Enhanced
Properties of Nickel-Base Superalloys Using Hot
Isostatic Pressing (HIP) of Powder Metals
John J. Conway, Mark S. Sperber and Frank J. Rizzo
Fracture Mechanism of Fe-Cu Alloy from Water-Atomized Powder
Hideki Kakisawa, Kazumi Minagawa & Kohmei Halada
Enhanced Processing of Silicon-Containing High Performance Materials
Suresh O. Shah, Michael Baran, Sunil N. Patel & Robert J. Causton
Mechanical Properties Distributions of P/M Parts
Joseph W. Newkirk & Sanjay Thakur
Processing of
Hybrid Alloys to High Densities
Ian
Donaldson, Sydney H. Luk, George Poszmik, and K.S. Narasimhan
Part 9 – Modeling
Critical Overview
of Sintering Computer Simulations
Randall M. German
Collaborative Monitoring and Control of Sintering
Sanjay K. Murthy & John
Schaberl
Modeling Liquid Phase
Sintering of Hard Metal Powder Compacts
Shama Shamasundar, Mahesha Siddegowda, Pavanachand Chigurupati
Renegarajan Raghavan & Ramesh Rao
Sintering of Functionally Gradient Ceramic Pre-Forms for
Near-Net-Shape Sintering
Andrey L. Maximenko & Eugene A. Olevsky
Sintering of
Multilayer Powder Composites Distortion and Damage Control
Eugene A. Olevsky, Andrey L. Maximenko, John Arterberry & Veena Tikare
Finite Element Analysis on the Sintering of
Stainless Steel 316L Powder Compacts
Rui
Zhang, Renata S. Engel, Nicholas J. Salamon & Randall M. German
Discrete Element
Modelling of Cold Compaction
of Composite Powders
Olle Skrinjar & Per-Lennart Larsson
Constitutive Modeling of Composite Powder Compacts
with Large Amount of Hard Phase
Danielle Pélissier, Christophe L.Martin & , Didier Bouvard
Production of
Rhenium Components by Cold Pressing and Sintering
Murali Pandheeradi, Charles A. Meglio,
Lori L. Denault, Carole L. Trybus & Todd A. Leonhardt
An Experimental Investigation of the Yield Behaviour of Compacts
Consisting of Spherical and Irregular Shaped Particles
Ludwig C. Schneider & Alan C. Cocks
Experimental Validation of Ashby HIP 6.0 Model Using
Interrupted HIP Cycles of P/M LC Astroloy
John J. Conway, Ian Nettleship, R.J. McAfee & E.S. Loehlein
Application of Optimization Technique in the Powder
Compaction and Sintering Processes
Young-Sam Kwon, Suk-Hwan Chung, Chantal Binet,
Rui Zhang, Renata S. Engel, Nicholas J. Salamon & Randall M. German
Three Rheological Tests - HIP, Uniaxial Pressing and Hot
Die Pressing- to Study the Powder Viscoplastic Behavior
Philippe Viot, Evariste Ouedraogo & Pierre Stutz
Numerical
Simulation of Die Compaction and
Sintering of Cemented Carbide
Olivier Alvain, Pierre Dorémus & Didier Bouvard
Modeling Cold
Compaction and Springback for
Particulate Reinforced Composites
Tony F. Zahrah, Li Ma & Richard J. Fields
Modeling and
Simulation of the Permanent Magnet Shaping Process
Franck Toussaint, Pierre Doremus, Didier Bouvard,
Philippe Tenaud & Eric Di Marcello
Advances in the
Application of 3D CAD Modelling for
P/M Product and Tooling Development
Kevin K. King, Robert Krueger, Hank Knott, John Theisen & Tim Geiman
Modeling of Metal Powder Behavior Under Low and High Pressures
Olivier Coube & Hermann Riedel
Finite Element
Analysis of Stresses in Green Bodies of Metal Powder
Pär
Jonsén & Hans-Ĺke Häggblad
Densification Behavior of Aluminum Alloy Powder Mixed with Zirconia
Powder Inclusion Under Cold Compaction
Kitae Kim, Sungchul Lee & Hyunseok Ryu
Modeling of
Conductivity Versus Density Behavior in Green-State
Powder Metallurgy Compacts
Georg H. Leuenberger & Reinhold Ludwig
Part 10 – Powder Injection Molding
Ultrafine Copper
Powder
Rudolf Huenert
Methods to
Increase the Sintered Density of Coarse Iron Powders
G.J. Shu & Kuen-Shyang Hwang
Effects of Mixing on the Rheology of Alumina Feedstocks
Pavan K. Suri , Sundar V. Atre & Randall M. German
Strategies for
Injection Moulding Metals and Ceramics
Marko Maetzig & Harmut Walcher
Powder Injection
Molding in Micro Technology
Volker Piotter, Thomas Gietzelt, , Lothar Merz, Robert Ruprecht, & Juergen
Hausselt
New Features in Material Issues for Metallic Micro Components by MIM
Astrid C. Rota
Feedstock
Development for Nitride Ceramics in
MicroPIM Based on Si3N4 and TiN
Lothar Merz, Steffan Rath, Gissur Orlygsson, Volker Piotter,
Robert Ruprecht & Juergen Hausselt
Experimental
Analysis of Metal Injection
Molding in a Flat Plate Cavity
James F. Stevenson, Richard L. Bye & Paul Chipko
Computer Analysis
Tools for Mixing,
Molding and Debinding for PIM Processing
Chengming Wang & Carole L. Trybus
Debinding and
Sintering of Metal and Ceramic MIM Components
in Batch Furnaces Using Vacuum/Controlled Atmospheres
Scott K. Robinson
Effect of
Atmosphere Pressure on Thermal Debinding Rate Behavior
Joseph A. Grohowski, & Joseph T. Strauss
Simulation of
Thermal Debinding
Ying
Shengje, Y.C. Lam, S.C.M. Yu & K.C. Tam
Thermal Debind
Studies on a Water
Based Gel System in Stainless Steel 17-4PH
Donald T. Whychell Sr., James Stevenson,
Jon Peltier, J.M. Goldenberg & Jerry C. LaSalle
In Situ
Monitoring of the Dimensional
Changes and Mechanisms During Solvent Debinding
Ethan Westcot, Chantal Binet & Randall M. German
Solvent Debinding
Technology for a Continuous 316L MIM Production
Sylvia Schwartz, Peter Quirmbach & Matthias Kraus
Diffusion of Alloying Elements During Sintering of MIM Master Alloys
Toby Tingskog, Gregory J. Del Corso, Michael L. Schmidt, & Donald T.
Whychell
Thermal Conductivity Evaluation of PIM Powders to Evaluate
Pre-Densification Sintering Phenomena
Constance E. Schlaefer & Randall M. German
Stoichiometry Between Carbon and
Oxygen During Sintering Process
in Cr-Mo Steel by Injection Molding
Hiroyuki Jinushi, Hideki Kyogoku, Shinichiro Komatsu & Hideki Nakayama
The Effect of
Powder Type and Powder Size
on Dimensional Variability in PIM
Rudolf Zauner, Donald Heaney, Jobe Piemme,
Chantal Binet & Randall M. German
Additional Studies
on Distortion of 316L and 17-4PH MIM Parts
Made From 1.5X Master Alloy/Carbonyl Iron Blended Powder
Donald T. Whychell Sr. & T.A. Tingskog
An Investigation
of Particle Orientation and
How it Relates to Anisotropic Shrinkage
Chantal Binet, Donald Heaney, Jobe Piemme & Patcharin Burke
Heat Treat
Response of Metal Injection Molded High Speed Tool Steels
Donald F. Heaney & Timothy W. Mueller
Mechanical
Properties Differences in PIM Materials
Tim J. McCabe & David Chang
Corrosion
Resistance of MIM 316L
Sunniva R. Collins
Sintering Simulation of PIM Stainless Steel
Deborah C. Blaine & Randall M. German
Hermeticity of MIM Materials in Electronics Packages
Mitchell N. Gross
Design and Planning Issues for the Installation and Start-up
of a Metal Injection Molding Plant
William J. Powers
Processing
Parameters for a Continuous MIM-Production
with an Aqueous Debinded 17-4PH-Feedstock
Peter Quirmbach, Sylvia Schwartz, Uwe Dasbach, Frank Petzoldt & Lutz Kramer
PIM In-process
Joining for More Complicated Shape and Functionality
Hideshi Miura, Takefumi Yano and Mitsuhiro Matsuda
Metal Injection
Molding of Blended Elemental
Titanium and Zirconium Powders
Ling-Yi Wang
The Effect of
Powder Loading on Dimensional Variability in PIM
Rudolf Zauner, Donald Heaney, Jobe Piemme, Chantal Binet, & Randall German
In the Bizarre
World of Metal Atomization - Increase the Material
Scrap to Achieve Optimal Processing Economics
Alan C. Goodrich, IBIS Associates
Environmentally
Benign Manufacturing and Materials Processing in Japan
Tatsuhiko Aizawa & Koumei Halada
Efficient Gas
Recycling Concept For A Wideflow Gas Atomizer
Gunther Schulz
Reduction of
Development Lead Time for Powder Metallurgy
Parts Using Concurrent Engineering
Mansig Kim
Effect of Binder Composition on Rheological Behaviour of
M2-HSS Powder-Polymer
Mixtures for PIM Tech
G. Herranz, B. Levenfeld, A. Varez & J.M.
Torralba
Part 11
- Advanced Processing & Properties
Development of the Agar-Binder Process to the Porous Sintered
Metals
Yuj Yoshida, Yuji Soda & Masakatsu Fukuda
Following the
Progress of Sintering by Measuring Viscosity
and Electrical Resistivity Variations
Olivier Lame, Sylvie Bordčre, Dominique Denux and Didier Bouvard
Liquid Phase
Sintering of Fe-3Cr-1Mn-0.5Mo High Carbon Steels
Tadeusz Pieczonka, Stephen C. Mitchell, Marin Stoytchev & Maciej Kowalczyk
Microstructural
Characterization of HSS Densified by
Hot Isostatic Pressing as a Function of the Process Variables
C. Zubizarreta, V. Trabadelo, S. Giménez, & I. Iturriza
Hot Explosive
Fabrication of Nanocrystaline W-based Powders
Akaki Peikrishvili, Nikoloz Chikhradze, Laszlo Kecskes, Avtandil Dgebuadze
Shaping of the
Massive Billets From the Nano-Particles
Alexander V. Spuskanyuk, Viktor Z. Spuskanyuk, Viktor N. Varyukhin,
Yan Beygelzimer and Nikolay G. Kasatka
Microstructure and
Mechanical Properties of Rapidly Solidified
and Extruded Al-20Si Alloy with Extrusion Direction
Soon-Jik Hong, Hyeon-Taek Son, Seong-Geun Seo, Byong-Sun Chun
Synthesis of
Nanocrystalline Ti-Al Powders
by High Energy Ball Milling
Prajina Bhattacharya, Pascal Bellon, Robert S. Averback, and Stephen J. Hales
Intelligent
Program Generator - The Key to
Economically Efficient Generation and Optimization of Flow Charts
Lutz Lackner
Theoretical
Calculations of the Stressed-Deformed State of Powder Materials
Nikoloz Chikhradze, Levan Japaridze, Akaki Peikrishvilli,
Zakaria Chikviladze & Ilia Lomidze
Direct Sheet
Fabrication of Advanced Materials
John D.K. Rivard, Craig A. Blue, Evan K. Ohriner, Adrian Sabau,
David C. Harper & N. Jayaraman
Chemical Analysis
of Powder Metallurgy Products
Timothy J. McGrady
An Application of the Universal Hardness Test to P/M Materials
Gian Filippo Bocchini, Barbara A Rivolta, & Giuseppe Silva
Hydromechanical Setting of the Porous Billet
from the Deformationally Strengthening Material
Viktor M. Varyukhin, Yan E. Beygelzimer & Alexander V. Spuskanyuk
Equipment to
Measure Thermal Diffusivity and
Thermal Conductivity During Sintering
Edward P. Peter S. Gaal, E. P. Hurst II, & Daniela E. Stroe
Shot Peened Powder
Metal Components Live Longer
"Improving Fatigue Life"
Thomas J. Meister & James R. Groark
Exothermic
Reactions in Hot Explosively Compacted Al-Ni Composites
Laszlo J. Kecskes, Steven T. Szewczyk, A.B. Peikrishvili & N.M. Chikhradze
Part 12
- Secondary Operations & Management Issues
Hard-Turning of Parts Made From Sinter-Hardenable Powders
Carl Blais, Brett A. Young, & Gilles L'Espérance
Turning of Warm
Compacted High Density P/M Steels in the
As-Sintered Condition
Andreas Benner & Paul Beiss
Hard Milling of
Powder Metallurgical Steel for Punches-Potentials
and Limitations for Complete Manufacturing
Fritz Klocke, Steffen Knodt & Lars Markworth
Role of Additives in P/M Machining
Robert J. Causton
Effect of Mn
Addition on Properties of Graphite Dispersed
Fe-Cu-Sn-Si Alloy Bearing Material By Powder Metallurgy
Yoshinori Mizuno, Shinji Yamada, Takashi Kikkawa & Tohru Takeda
Sintered Stability and Machinability of P/M
Steel Using Modified MnS Additions
Kang Yull Lee, Dong-Kyu Park, Hyung-Bum Kim, In-Shup Ahn
Study on the Wear
Properties of Astaloy CrM and Distaloy
AB Sintered Steels Undergoing Different Thermal Treatments
Mario Rosso & Marco Actis Grande
Influence That
Addition of a Hard Particle Gives to Wear
Resistance and Physics Characteristic
Yoshihisa Ueda
Induction Hardening of P/M Sprocket
Eric L. Hutton, Dan McCurdy & Rick Smith
Surface
Engineering of Low Chromium and Molybdenum
P/M Steels by Plasma Treatments
Alberto Molinari, Teodora Marcu Puscas, Giovanni Straffelini & Yang Yu
Mechanism and
Prevention of HAZ Cracking of
Fe-C-Cu Sintered Steels During Welding
Kenji Shinozaki, Hidenori Kuroki, Taichi Shinzawa, & Kazuo A Asaka
Development of
Enhanced Green Strength
Lubricating Systems for Green Machining
Linda Tremblay, J.E. Danaher, Francois Chagnon, and Y. Thomas
Influence of
Powder Characteristics on Green Machining Performance
Sundar V. Atre, Paul Cohen & Katia Menendez
Powder Mixes with
High Green Strength Make Green Machining Possible
Maria Ramstedt, Olof Andersson, Hilmar Vidarsson, & Bo Hu
Part 13
– Sintering
Effect of Sinter Hardening on Properties of High
Temperature Sintered PM Steels
Ulf Engström, John McLelland & Barbara Maroli
Sintering of Prealloy 3Cr-0.5 Mo Steel Powder in Carbon/Carbon
Composite Mesh Belt Furnace
Kouki Kanno, Yoshinobu Takeda, Björn Lindqvist,
Susumu Takashi and Kiichi Kanda Kanto
Economics and
Benefits of High Temperature
Sintering of High Performance Alloys
John W. Schaberl, Michael Baran, Michael Marucci, & Ronald A. Posteraro
Advanced
Sinter-Hardening Materials and Practices
Francis Hanejko, Alan Taylor & Arthur Rawlings
Properties of High Density Sinter-Hardening P/M Steels
Processed Using an Advanced Binder System
Michael Marucci,
Michael Baran & K.S. Narasimhan
Influence of
Density and Surface/Volume Ratio on the Cooling
Speed of Sinter-Hardening Materials Microstructure and
Microhardness Distribution Inside Parallelepipeds
Gian Filippo Bocchini, Barbara Rivolta, Giuseppe Silva,
M.G. Ienco, M.R. Pinasco & E. Stagno
Effect of Copper
Additions on Properties of
1.5% Mo Low Alloy Sintered Steels
François Chagnon & Yves Trudel
Sinter Hardening Characteristics of Ni-Mo-Mn-Cr Pre-alloyed Steel Powder
Hironori Suzuki, & Masaaki Sato & Yoshikazu Seki
Sinterhardening of
New PM-Steels: Modular Furnace Concept for
Stringent Sintering Process Conditions
Hartmut Weber
Cooling Rate
Effects on the Metallurgical Response of a
Recently Developed Sinter-Hardening Grade
Fred J. Semel
Pressure
Quenching--The Sure Way to Sinter Hardenability
Kenneth H. Moyer & William R. Jones
Sintering and
Microstructure of Al-Si P/M Components
Hans-Claus Neubing, Johann Gradl, & Herbert Danninger
Sintering of Aluminum in Argon and Nitrogen
Graham B. Schaffer & Brendan J. Hall
Sintering of High
Performance PM Aluminum Alloys
Hartmut Weber, Patrice Delarbe, Michael Krehl, & Kersten Link
In Situ Characterization of the Sintering Process in Ferrous Compacts
Through Thermal Diffusivity Measurement
Herbert Danninger & Gert Leitner
In-Situ Microtomography of Metal Powder Compacts During Sintering
Olivier Lame, Daniel Bellet, Marco Di Michiel, and Didier Bouvard
3-D Analysis of Sinter Processes by X-ray Computer Tomography
Michael Nöthe, K. Pischang, R. Bernhardt & Bernd Kieback
Effect of Heating Rate on Densification and Distortion of W-Ni-Fe Heavy
Alloys
Ravi Bollina & Randall M. German
Effect of Atmosphere in the Sintering of Heavy Alloys
Samidipoyena B. Chandrasekhar, Vittal A. Mahendar,
A. Shiv Kumar & R. Sundaresan
Effect of
Inhomogeneity on Dimensional Precision in Liquid Phase Sintering
Ravi Bollina, Matt Bell, Yunxin Wu & Randall M.German
Microstructure and Interface Analysis of
Liquid Phase Sintered W-Mo-Ni-Fe Heavy Alloys
Kuan-Hong Lin, Chen-Sheng Hsu & Shun-Tian Lin
Sintering of W-Cu Composite Material by Hollow Cathode Discharge
Uilame Gomes, Clodomiro Alves Jr., Caubi F. Souza Jr,Vaclav Hajek,
Franciné Alves da
Costa, & Francisco Ambrózio Filho
Protocol for
Developing Sintering Cycles for Difficult Materials
Randall M. German
Furnace Atmosphere
(Balance and Flow Direction of the Atmosphere Within Your Furnace)
Ed Levanduski, Jason Gabler & Daniel P. Reardon
Impacts of
Different Profiling Techniques
Jason J. Gabler, Dan P. Reardon & Ed Levanduski
Mechanisms of Sulfur Loss and Thermochemistry of MnS in
Sintered Resulfurized Steel Powders
Mark R. Haas & B. A. Nichols
Considerations When Sintering Oxidation- Sensitive PM Steels
Bjorn Lindqvist & Koki Kanno
Degassing During Sintering of Cr-Mo Steels Prepared
from Prealloyed Powder
Herbert Danninger, Sabine Kremel, Gert Leitner,
Klaus Jaenicke-Rößler & Yang Yu
The Effect of Sintering Atmosphere on the Chemistry and
Microstructure of Near-Net-Shape Processed Tool Steel Powders
Maria K. Sawford, Joseph F. Muha & Donald F. Heaney
Supersolidus Liquid Phase Sintering of Austenitic Stainless
Steel-Yttria Composites
J. Shankar, Anish Upadhyaya, & R. Balasubramaniam
Transient and Supersolidus Sintering of Premixed & Prealloyed Bronze
Anish Upadhyaya, S. Ghosh, G. Wilde & R.K. Ray
Outgassing Characteristics of Various Cr Powders
Wangpei Li & Aurora Rubel
A Novel Heating
Element for P/M Sintering
Mats Sundberg, Anders Magnusson & Donald T. Whychell
The Use of
Microwaves for Sintering of P/M Steel Parts
Frank Petzoldt, Barbara Scholz, Ho-Seon Park & Monika Willert-Porada
Densification of Pre-Mixed and Pre-alloyed Cu-12Sn Bronze
During Microwave and Convential Sintering
Anish Upadhyaya, G. Sethi, H. Kim, D.K. Agrawal & Rob Roy
Statistical Approach to a Leaner Sinter Hardening P/M Alloy
Gerald A. Gegel, Michael A. Pershing, Thomas F. Murphy and Gerard J. Golin
A Dimensional
Study on the Sintering and Infiltration of Steel Powders
Anand Lal
Part 14 -
Magnetic Materials
Structural Anisotropy in NdFeB Magnets Processed by
Hot Working of Melt-Spun Ribbon Powder
Marcin Leonowicz, Daniela Derewnicka, Hanna Krzton, & V. Panchanathan
Magnetic Properties of Fe-Co Alloy Powders Prepared by Reduction Method
Baek-hee Lee, Bong Su Ahn, Dae-Gun Kim, Myung-Jin Suk, & Young Do Kim
Effect of Particle
Shape of Compressed Cores With Atomized Powders
Satoshi Takemoto & Takanobu Saito
Soft Magnetic Composites -Properties and Applications
Lars Hultman & Zhou Ye
Development of High-Magnetic Performace P/M Soft Magnetic Material
Yoshiyuki Shimada, Hitoshi Oyama, Takao Nishioka & Akira Yamakawa
Experiments on Preparing NdFeB Dielectromagnets Designed to
Work in High Temperatures
Barbara M. Slusarek & Andrzej Nowakowski
High Velocity
Compaction of Soft Magnetic Composites
Ola Andersson
Developing a Soft
Magnetic P/M Component in
Wireless Communication Devices with High Green Strength Lubricants
Ray Guo, Chao-Hsu Cheng & John Lee
Development of Electric Power Steering Torque Sensor
Used Insulated Iron Powder
Masayuki Yamamoto, Hideaki Tsuchiya, & Shunsuke Nakaura
Consolidation of a Lubricated Ferromagnetic
Powder Mix for AC Soft Magnetic Applications
Louis-Philippe Lefebvre, Claude Gélinas & Paul-Emile Mongeon
Flaky-Shaped Iron Powder for High Frequency Magnetic Applications
Naomichi Nakamura, Yukiko Ozaki & Satoshi Uenosono
Effect of Temperature on the Soft Magnetic Properties
of Iron with (1 weight %) Alloy
Susil K. Putatunda & Ranta Naik
Microstructural Characterizations of Pores and Grains For
Specific
Properties in P/M Soft Magnetic Materials
Takashi Itoh, Katsushi Kusaka & Yoshimoto Wanibe
Iron-Tin Alloys-- Competing Alloys with
Phosphorus Irons for Magnetic Applications
Kenneth H. Moyer & Krishna B. Patel
Processing of
FerroPhosphorus-Containing
Mixes in Low Hydrogen Atmospheres
Kalathur S. Narasimhan, D.J. Kasputis, G. Fillari & J.C. Lynn
