Keynote Presentation - Medical Device Challenges for MIM and PM components
Gary Jaworek- Senior Principal Engineer Johnson & Johnson, Medical Devices
Corrosion Behaviors of Additively Manufactured H13 and Maraging Steel MS1 Tool Steels for Die Casting Mold Applications
Xuehui Yang, Indiana University - Purdue University Indianapolis, Co-authors: Alan Jones, Yeou-li Chu, Jing Zhang
Chemical-Mechanical Surface Finishing of MIM and Binder Jet Components: Observations and Recommendations
Lane Winkelmann, REM Surface Engineering, Co-authors: Justin Michaud, Agustin Diaz, Lane Winkelmann
Development of Biobased Feedstock for PIM-Like Extrusion-Based Additive Manufacturing
Nicolas Charpentier, Femto-ST, Université de Franche-Comté, Co-authors – Thierry Barriere, Frederic Bernard, Nathalie Boudeau, Alexandre Gilbin
Metal Binder Jetting of Superalloy Impeller for Turbocharger Application
Chad Beamer, Quintus Technologies LLC, Co-Author - Fredrik Berg Lissel, Mattia Forgiarini, Tim Noronha
Solvent Debinding: A Comparison of the Overall Efficiency of Traditional Debinding Solvents to Halogenated Azeotropic Solvent Mixtures.
David Ferguson, MicroCare, LLC
Role of Nitrogen and Other Minor Alloying Elements on Microstructural Evolution During the Heat Treatment of 17-4 PH Grade Stainless Steel
Derek J Shaffer, Pennsylvania State University, Co-author – Todd Palmer
Production of Permanent Magnets from Recycled Nd-Fe-B Powder Using the Extrusion Debonding Sintering Process
Stefan Rathfelder, Co-Authors - Santiago Cano, Christian Kukla, Carlo Burkhardt, Clemens Holzer
Additive Manufacturing of Aluminum Alloy by Metal Fused Filament Fabrication (MF3)
Luke Joseph Malone, Co-author – Sundar Atre
Building Confidence Through Virtual Metal Injection Molding
Harshal Bhogesra , SIGMA Plastic Services, Inc.
Costing of MIM Components
Matt Bulger, ATPM Consulting
Plasma Powder Production for MIM Applications
Jérôme Pollak, Tekna
Exploring Automated Bending Process for MIM Part Dimensional Correction
Douglas Kaercher, The Arc Group Worldwide
Reduction in Shrinkage of Binder Jet Printed Large Stainless-Steel Parts Using Novel Metal Powders
Kyle Myers, ExOne and Adam Bartel, Tundra
17-4PH Stainless Past and Present
Tim McCabe, OptiMIM
The 1st Ever Direct Jetting for High-Definition Additive Manufacturing of Metals & Ceramics
Dror Danai, XJet LTD.
A Review of Vacuum Induction Melting Inert Gas Atomization (VIGA) Technology as Well as Modified Efficient Water Atomized Technology
Ralf Carlström, Höganäs AB
Powder Production and Metal Injection Molding (MIM) of a Novel Light-Weight, High-Strength, Non-Magnetic Steel, Compared with Ti6Al4V Alloy Alternative
Paul A. Davies, Sandvik Osprey Ltd., Co-authors: Rudolf Seiler, Thorsten Staudt, Eleonora Bettini, Luke Harris
Mitigating Post-Sinter Distortion in MIM via Machining in the Green State
Levi M. Rust, ARC Group Worldwide
Application of Hot Disk Transient Plane Source for Thermal Conductivity Evaluation During Metal Injection Molding: Case of Metal Powders
Artem A. Trofimov, Orton Ceramic Foundation
Impact of Gas Guiding in an Improved Debinding and Sintering Furnace for AM Parts: CFD Simulations and Initial Experimental Results
Tim Ohnweile, Carbolite Gero
Sintering Behavior of Binder-Jet Printed H-13
James W. Sears, AMAERO
Comparison of Binder-Jet and MIM
Animesh Bose, FAPMI, Desktop Metal, Inc.
Dry Ice Cleaning in MIM - Who Needs It?
Steve Wilson, Cold Jet LLC
Metal Injection Molding of F75 (Co-28Cr-6Mo)
John L. Johnson, FAPMI, Novamet/Ultra Fine Specialty Products
Effect of Nb Addition and Sinter Conditions on AISI-420 Martensitic Stainless Steels Produced by Powder Injection Molding: Microstructural, Mechanical and Corrosion Properties
H. Özkan Gülsoy, Marmara University
Two Component Micro Powder Injection Molding of Bi-Material Stainless Steel 17-PH and Yttria Stabilized Zirconia
Abu Bakar Sulong, Universiti Kebangsaan Malaysia, Co-authors: Ai-Basir, Nashrah Hani Jamadon, Norhamidi Muhamad