| U.S.A. | |
| Molybdenum and Molybdenum-Alloy Seamless Tubing | |
| Donald E. Mitchell, Rhenium Alloys, Inc. | |
| Iran | |
| An Investigation on the Effect of Some Processing Parameters on the Size Distribution and Morphology of Al Powders Produced via SAMD Method | |
| Pooya Delshad Khatibi, Farshad Akhlaghi, Tehran University | |
| Korea | |
| Effect of the Solid-Solution Phase on the Mechanical Properties and Microstructure of TiC-Based Cermets | |
| Shinhoo Kang, Hanjung Kwon, Seoul National University | |
| Korea | |
| Effect of Sintering Conditions in the Magnetic Properties of Soft Magnetic Materials | |
| Youngmin Kim, Guhyun Kim, Jongkyun Kim, Kwangbo Choi, Inbum Jeong, ChangSung | |
| Russia | |
| Semi-Finished Products from New Structural Materials Based on Granular Magnesium Alloys | |
| Boris V. Ovsyannikov, Alexander V. Ponomarev, Kamensk Uralsky Metallurgical Works & Nikolay N. Shanin, NPP Metagran | |
| Japan | |
| Advanced Mechanical Properties of the Shell/Core Hybrid Powder Compacts | |
| Tetsufumi Yoshida, Masashi Nakatani, Keita Ono, Hiroshi Fujiwara, Kei Ameyama, Ritsumeikan University | |
| Estonia | |
| Microstructure Evolution in WC-Co Composites During Reactive Sintering from Nanocrystalline Powders | |
| Juri Pirso, Mart Viljus, Renee Joost, Kristjan Juhani, Sergei Letunovits, Tallinn University of Technology | |
| Japan | |
| Mg-Fe-O Insulation Coating on Pure Iron Powders for Magnetic Powder Cores | |
| Katsuhiko Mori, Masahisa Miiyahara, Koichiro Morimoto, Mitsubishi Materials PMG Corporation & Kazunori Igarashi, Muneaki Watanabe, Ryoji Nakayama, Mitsubishi Materials Corporation | |
| Canada | |
| ATEM Investigation of the Mechanisms Occurring During Transient Liquid Phase Sintering of Steel Powders with Fe?P Addition | |
| Mathieu Boisvert, Ian Bailon Poujol, Patrick Boilard, Gilles L'Esperance, Ecole Polytechnique de Montreal | |
| China | |
| On the Formation of Tertiary Gamma Prime Precipitates in a Powder Metallurgy Superalloy | |
| Gaofeng Tian, Chengchang Jia, Benfu Hu, University of Science and Technology Beijing | |
| Taiwan & Trinidad and Tobago | |
| Bulk Amorphous/Amorphous Composite Alloys Formed by Mechanical Alloying and Vacuum Hot Pressing | |
| Pee-Yew Lee, National Taiwan Ocean University & Yu-Wei Lin, National Cheng Kung University | |
| Korea | |
| Mechanical Properties of ZnS and ZnS-SiO? Consolidated by Spark Plasma Sintering | |
| Young Do Kim, Gil-Su Kim, Dae Hoon Shin, Se-Hoon Kim, Hanyang University | |
| Brazil | |
| High-Energy Milling of Iron-Titanium Powder Mixtures: A Cold-Welding Problem | |
| Ricardo M. Leal Neto, Railson Bolsoni Falcão, Eneida da Graca Guilherme, Instituto de Pesquisas Energéticas e Nucleares | |
| China | |
| Density Distribution of W-Ni-Fe Sheet Blank by Continuous Sintering | |
| Yubin Zhu, Yang Ning, Chen Yuhua, Xiao Haibin, Shanghai University | |
| China | |
| Research Progress in High-Performance Molybdenum Alloy Materials in China | |
| Xiaoqing Yang, Kangde Xie, Yonggui Zhou, Zhenzhong Luo, Zigong Cemented Carbide Corp., Ltd. | |
| China | |
| Rapid Prototyping of Titanium Alloys by Electron-Beam Selective-Melting Technology | |
| Weiwei He, Xin Yang, Huiping Tang, Haiyan Liu, Northwest Institute for Nonferrous Metal Research & Haibo Qi, Tsinghua University | |
| China | |
| Direct Desulphurization of Refined Molybdenum Disulfide Ore to Molybdenum Metal Powder and Metal Ingots by Microwave Radiation | |
| Larry G. Hurtt, Syno-Therm Co., Ltd. & Zhijie Li, Lin Cong, Research Institute of Microelectronic Materials | |
| Japan & Australia | |
| Effects of Process-Control Agent on the Microstructure and Mechanical Properties of Ti-Sn-Nb Alloy Prepared by Mechanical Alloying | |
| Yasuo Yamada, Materials Research Inst. for Sustainable Development, National Inst. of Advanced Industrial Science & Tech & Alireza Nouri, Yuncang Li, Jianguo Lin, Peter D. Hodgson, Cui'e Wen, Deakin University, Centre for Material and Fibre Innovation | |
| Turkey | |
| The Effect of Spray Distance and Rotating Speed on Coating Layer in Low-Carbon Steels | |
| Behcet Gulenc, Adem Kurt, Hakan Ates, Gazi University, Cevat Kurt, Hitit University & Ilyas Uygur, Duzce University | |
| U.S.A. | |
| Press and Sinter Processing of 7xxx Series Al Alloy Powders | |
| James D. Martz, Christina U. Braun, Steven D. Johnson, The Pennsylvania State University, DuBois | |
| Turkey | |
| Investigation of Weldability of Powder Metal Al Plates By Friction Stir Welding | |
| Hakan Ates, Adem Kurt, Gazi University & Mustafa Cakyr, Ministry of National Education | |
| Brazil | |
| Study of Niobium Carbide Production by High-Energy Milling Using an Argon Atmosphere | |
| Silvio F. Brunatto, Thalys D. Menezes, Kleber D. Machado, UFPR–Federal University of Parana |